|
SOM CODE : 1887/150
Model : FIWE3 F30530201
COMPANY : VELP SCIENTIFIC,ITALY.
RAW FIBER EXTRACTOR 3
CHANNEL 230V 60Hz
There are several analytical
methods use for the determination of raw fiber (or its components) in food
and feed sectors. Among them, Weende Method and the AOAC method for
determination of total raw fiber, and furthermore Van Soest methods for Ndf
(neutral detergent fiber) and Adf (Acid detergent fiber). Finally the
methods to determine the single components of the fiber (cellulose,
lignin,..).
VELP Scientifica has
developed the extraction unit FIWE 3 with 3 places, a flexible solution able
to satisfy all above mentioned analytical needs.
This instrument is able to optimize the operator’s manuality, to drastically
reduce the analysis time, by assuring absolutely reliable results. FIWE
unit allows to perform the analysis in the operational standardized
conditions requested by the official methods.
Technical Data
|
Construction material: |
epoxy
painted stainless steel structure |
|
Number of samples: |
3 |
|
Digital timer: |
0 -
99 minutes with acoustic signal at the end of the cycle |
|
Type
of extractions: |
cold
and hot extractions |
|
Sample removal: |
air
pump |
|
Reagent discharge: |
peristaltic pump |
|
Temperature: |
electronic regulation |
|
Power: |
900W |
|
Power
supply: |
115 V
or 230 V / 50-60 Hz |
|
Weight: |
35 Kg
(77 lb) |
|
Dimension (WxHxD): |
530X620X390 mm (20.9x24.4x15.4 in) |
|
 Brouchure
|
|
|
SOM CODE : 1887/151
Model : FIWE6
COMPANY : VELP SCIENTIFIC,ITALY.
RAW FIBER EXTRACTOR 6
CHANNEL 230V 60Hz
There are several analytical
methods use for the determination of raw fiber (or its components) in food
and feed sectors. Among them, Weende Method and the AOAC method for
determination of total raw fiber, and furthermore Van Soest methods for Ndf
(neutral detergent fiber) and Adf (Acid detergent fiber). Finally the
methods to determine the single components of the fiber (cellulose,
lignin,..).
VELP Scientifica has
developed the extraction unit FIWE 6 with 6 places, a flexible solution able
to satisfy all above mentioned analytical needs.
This instrument is able to optimize the operator’s manuality, to drastically
reduce the analysis time, by assuring absolutely reliable results. FIWE
unit allows to perform the analysis in the operational standardized
conditions requested by the official methods.
Technical Data
|
Construction material: |
epoxy
painted stainless steel structure |
|
Number of samples: |
6 |
|
Digital timer: |
0 -
99 minutes with acoustic signal at the end of the cycle |
|
Type
of extractions: |
cold
and hot extractions |
|
Sample removal: |
air
pump |
|
Reagent discharge: |
peristaltic pump |
|
Temperature: |
electronic regulation |
|
Power: |
1200W |
|
Power
supply: |
115 V
or 230 V / 50-60 Hz |
|
Weight: |
46 Kg
(101.2 lb) |
|
Dimension (WxHxD): |
760X620X390 mm (29.5x24.4x15.4 in) |
|
Brouchure
|
|
|
SOM CODE : 1887/148
Model : SER-148/3
COMPANY : VELP SCIENTIFIC,ITALY.
SOLVENT FIBER
EXTRACTOR APPARATUS 230V 60Hz
The
SER 148/3 unit allows a substance or group of substances to be
quantitatively separated (e.g. fat) from a mixture of solids or semisolids.
Extraction is carried out in accordance with the Randall technique, which
works in two phases (plus one to recover the distilled solvent).
This technique offers protection against atmospheric pollution, and cuts
analysis costs and extraction time.
The instrument, designed to optimize ease of handling, is provided with a
microprocessor allowing up to 29 different work programs to be set. The
operational phases set will be carried out in sequence with the temperature
and remaining time constantly shown on two different displays.
The analyses are performed in absolute safety thanks to its IP55 protection
rating.
The main fields of application include analysis of food products, animal
feeds, detergents, rubber and plastic formulations, pharmaceutical products,
soils, etc. for the content of soluble products such as fats, detergents,
plasticizers and pesticides.
Technical Data
|
Construction material: |
epoxy
painted stainless steel structure |
|
Number of programe |
29 |
|
Number of samples: |
6 |
|
Max
volume extraction cup: |
150
ml |
|
2
Display: |
working temperature / settable parameters |
|
Power: |
500W |
|
Power
supply: |
115 V
or 230 V / 50-60 Hz |
|
Weight: |
30 Kg
(66 lb) |
|
Dimension (WxHxD): |
480x620x390 mm (18.9x24.4x15.4 in) |
|
Brouchure
|
|
|
SOM CODE : 1887/149
Model : SER-148/6
COMPANY : VELP SCIENTIFIC,ITALY.
SOLVENT FIBER
EXTRACTOR APPARATUS 230V 60Hz
The
SER 148/6 unit allows a substance or group of substances to be
quantitatively separated (e.g. fat) from a mixture of solids or semisolids.
Extraction is carried out in accordance with the Randall technique, which
works in two phases (plus one to recover the distilled solvent).
This technique offers protection against atmospheric pollution, and cuts
analysis costs and extraction time.
The instrument, designed to optimize ease of handling, is provided with a
microprocessor allowing up to 29 different work programs to be set. The
operational phases set will be carried out in sequence with the temperature
and remaining time constantly shown on two different displays. The analyses
are performed in absolute safety thanks to its IP55 protection rating.
The main fields of application include analysis of food products, animal
feeds, detergents, rubber and plastic formulations, pharmaceutical products,
soils, etc. for the content of soluble products such as fats, detergents,
plasticizers and pesticides.
Technical Data
|
Construction material: |
epoxy
painted stainless steel structure |
|
Number of programe |
29 |
|
Number of samples: |
6 |
|
Max
volume extraction cup: |
150
ml |
|
2
Display: |
working temperature / settable parameters |
|
Power: |
500W |
|
Power
supply: |
115 V
or 230 V / 50-60 Hz |
|
Weight: |
30 Kg
(66 lb) |
|
Dimension (WxHxD): |
480x620x390 mm (18.9x24.4x15.4 in) |
|
Brouchure
|
|
|
SOM CODE : 1887/152
Model : COEX
COMPANY : VELP SCIENTIFIC,ITALY.
COLD EXTRACTOR
230V 60Hz
Samples that must be
subjected to calculation of the raw fiber must have less than 1%
fat content. If the fat content is greater than 1%, preliminary extraction
using acetone, hexane or petroleum ether is required.
The COEX instrument was developed to quickly degrease the samples inside the
crucibles that will be used on the FIWE 3 or FIWE 6 for consequent
determination of raw fiber.
COEX is the right solution to
speed up and optimizing the raw fiber analysis preliminary phase.
Technical Data
|
Construction material: |
epoxy
painted stainless steel structure |
|
Type of extractions: |
cold |
|
Reagent discharge: |
peristaltic pump |
|
Power: |
120 W |
|
Power
supply: |
115 V
or 230 V / 50-60 Hz |
|
Weight: |
19 Kg
(41.8 lb) |
|
Dimension (WxHxD): |
730x300x380 mm (29.5x11x15 in) |
|
Brouchure
|
|
Som Code : D53/208
MODEL :3500100
COMPANY :
LABCONCO,U.S.A
Goldfisch Fat Extractor
Goldfisch Fat Extractor. Used
to determine fat and oil content in samples. Listed in AOAC methods. Frame
is constructed of anodized aluminum. Features: six 100-watt, spring-loaded
heater elements operated by 3 infinite-control knobs with variable heat
input from 20-100% capacity; red pilot light; six metal condensers with Type
304 stainless steel heads and six automatic pressure-release valves; on/off
switch; 3/8" IPS control valve for connection to cold water supply; 3/4" IPS
water outlet for connection to an open drain of at least 3/4" IPS; and
6-foot, 3-wire cord with plug. Includes 6 support stirrups, 12 borosilicate
glass 100 ml beakers, 6 alundum extraction thimbles, 6 heat covers, 6 cork
gaskets, 6 beaker rings, 6 upper condenser gaskets, 9 sample tubes and 9
borosilicate glass reclaiming tubes
Product Specifications
Item Dimensions:
35.75"w x 9"d x 26.88"h
Electrical Specification: 115 V, 50/60 Hz, 5.2 amps
Product Subcategory: Goldfisch Fat Extractor
Purpose: Fat Extraction
|
|
|
SOM CODE : 1386/200
MODEL :3500200
COMPANY :
LABCONCO,U.S.A
Crude Fiber Apparatus
Crude Fiber Apparatus. Used
in the determination of crude fiber in feed, food and other agricultural
products. The Apparatus is a reflux condenser designed to operate with
speed and accuracy. Contains six Type 304 stainless steel condensers with
inverted cone bases. Includes six 350 watt heaters operated by six
individual infinite-control knobs with variable input from 20-100%
capacity and with pilot lights for each heater. Twelve tall-form,
straight-sided 600 ml beakers, manufactured of durable thick-wall
borosilicate glass, are provided. Frame is constructed of anodized
aluminum mounted on a Colorlith base. Comes fully assembled.
Product Specifications
Item Dimensions:
35.69"w x 9"d x 27.19"h
Electrical Specification: 230 V, 50/60 Hz, 9.1 amps
Product Subcategory: Crude Fiber Apparatus
Purpose: Crude Fiber Digestion
|
|
|
|
Series Extraction.
COMPANY : IKA, Germany.
Extractor FEX IKA 200 & 50 Control W/STD 200V/60Hz.
Space-saving PC-controlled serial extractor for performing 4 & 6 extraction procedures at the same time depending upon the model as mentioned below. Suitable for the extraction of soil samples, pharmaceutical drugs, plastics and fats from foodstuffs.
A new principle with PTFE membrane filters ensures effective eddy current, solid-fluid hot extraction and subsequent pressure filtration all in the same apparatus.
Specifications :
|
Som Code |
1890/200 |
1890/50 | |
Model |
8016200 |
8016300 | |
Extration apparatus |
4 |
6 | |
Volume of basic vessels ( ml ) |
200 |
50 | |
Recommended working volume ( ml ) |
4 x 100 |
6 x 30 | |
Input ( W ) |
650 |
650 | |
Heat Input ( W ) |
600 |
600 | |
Speed range ( 1/min ) |
0 - 1.100 |
1.100 | |
Interface |
RS 232 |
RS 232 |
Features :
-Requires less space owing to arrangement of 4 apparatus on the
installation space normally required by one conventional unit.
-Less chemicals need to be used, reduced waste disposal costs.
-Simultaneous extraction and filtration in one apparatus, short extraction
cycles.
-Standard software with indivisual pre-selection of all process parameters.
-Semi-automatic process sequence.
-Software configured to control 1 - 8 apparatus simultaneously.
-Low initial purchase and follow-up costs.
|
Model : 8016200
|
|
|
|
Model : 8016300
|
|
System Requirments :
-80486 Personal compute.
-8 MB RAM.
-4 MB available hard disk space.
-VGA graphics card.
-Mouse.
-1 free serial interface .
-Windows 3.1 or higher. |
|
|
SOM
CODE : 1887/153
Model : A00001135
Company : VELP
SCIENTIFICA, ITALY.
WATER SPRAY DEVICE FOR VELP
FIWE6 FIBER EXTRACTOR
|
|
|
|
SOM
CODE : 1887/154
Model : A00000140
Company : VELP
SCIENTIFICA, ITALY.
GLASS CRUCIBLE P2 FOR VELP
EXTRACTORS 6PCS/BOX
|
|
|
|
Som
Code : 1887/41
Model : 11.1141
Company : VELP
SCIENTIFICA, ITALY.
EXTRACTION CAP
|
|
|
Som
Code : 1887/48
Model : 11.1148
Company : VELP
SCIENTIFICA, ITALY.
EXTRACTION THIMBLES.
|
|
|
Note : Please mention the product "SOM CODE" while making request for quotation and send it to dabab@somatco.com.
|
