LABORATORY & SCIENTIFIC EQUIPMENTS ( Freeze Dry System And Accessories )

SOM CODE : D260/1
Model : 7750040
COMPANY : LABCONCO, U.S.A..

FREEZE DRYER COMPLETE SET WITH VACUUM PUMP

FreeZone 4.5 Liter Benchtop Freeze Dry System is designed for light aqueous sample loads. This model is not for use with samples containing acetonitrile. Removes over 2 liters of water in 24 hours. Includes brushed stainless steel and epoxy-coated steel exterior; LCD that displays system operating parameters; set-up parameters and alarm messages (choice of temperature in °C and ° F, choice of vacuum in mBar, Pa and Torr); 1/3 hp CFC-free refrigeration system; red alarm light; LED vacuum and temperature wave graphs; patented moisture sensor; vacuum control/break valve; rear-mounted RS-232 port; automatic start-up switch for collector cool-down and vacuum pull-down with manual override switches; retractable collector drain line; power switch; rear-mounted electrical receptacle for vacuum pump connection (pump not included); 3/4" OD vacuum connection; 3/4" ID vacuum hose; and two clamps.

Features a permanently-installed 10-port stainless steel drying chamber and stainless steel collector chamber and coil.

Product Specifications

Item Dimensions: 18.6" w x 18.5" d x 22.5" h
Electrical Specification: 208/230 volts, 60 Hz, 2.5 A
Style: Benchtop
Collector Type: Stainless steel
Ice Holding Capacity: 4.5 L
Collector Temperature: -50°C, -58°F
Electrical Standard: Domestic
Built-In Options: 10-port Drying Chamber
Drying Accessory: 10-port, permanently installed
Compliance: UL 61010A-1, CAN/CSA C22.2 No. 1010.1
Vacuum Pump Required: 86 L/Min. or larger displacement

COMPANY : LABCONCO, U.S.A..

FREEZE DRY FLASK

Select Fast-Freeze Flasks based on your sample sizes. Flasks should be filled to no more than one-third of their volume so that maximum surface area is achieved and efficient lyophilization is assured. A complete Fast-Freeze Flask includes a rubber top, glass bottom and a supply of filter paper. Tops, bottoms and filter paper are available separately as replacement components. Adapters are required to attach flasks to freeze dry valve ports.

SOM CODE	Model	CAPACITY
D260/3	754000	40 ml
D260/4	7540300	120 ml
D260/5	7540600	300 ml
D260/6	7540800	600 ml

COMPANY : LABCONCO, U.S.A..

ADAPTOR

Add the Adapters for connecting the Fast-Freeze Flasks to the valve ports on your drying chamber or manifold. Choose borosilicate glass or stainless steel adapters in 1/2" and 3/4" diameters.

SOM CODE	Model	CAPACITY
D260/8	754700	1/2 STRAIGT
D260/10	7547400	3/2 STRAIGT
D260/7	7547200	1/2 STRAIGT 45°
D260/9	7547600	3/4 STRAIGT45°

COMPANY : LABCONCO, U.S.A..

LYPH-LOCK FLASK

Select the Lyph-Lock Flasks based on your sample sizes. Flasks should be filled to no more than one-third of their volume so that maximum surface area is achieved and efficient lyophilization is ensured. A complete Lyph-Lock Flask includes a glass top and bottom and a rubber ring seal. Tops, bottoms and seals are available separately as replacement components. Adapters are required to attach flasks to freeze dry valve ports.

SOM CODE	Model	CAPACITY
D260/20	7550200	50ML 19/38 STJ
D260/21	7550400	100ML 19/38 STJ
D260/29	7550400	100ML 19/38 STJ
D260/22	7550600	250ML 19/38 STJ

COMPANY : LABCONCO,U.S.A..

ADAPTOR

Add the Adapters for connecting the Lyph-Lock Flasks to the valve ports on your drying chamber or manifold

SOM CODE	Model	CAPACITY
D260/23	7568000	19/38 90° STJ 1/2 INCH VALUE
D260/24	7568200	19/38 90° STJ 3/4 INCH VALUE

COMPANY : LABCONCO, U.S.A..

SERIUM BOTTLE

Perfect for long term storage of freeze dried samples. Labconco Serum Bottles and Threaded Vials are specifically designed for lyophilization applications. Their uniform thin wall construction ensures even freezing and drying. Bottles and vials are ideal containers for use in the FreeZone Stoppering Tray Dryer. Serum bottles also connect to valve ports on drying chambers and manifolds. Serum Bottles, Stoppers and Seals are supplied in packages of 100.

SOM CODE	Model	CAPACITY
D260/26	7573610	30ML

COMPANY : LABCONCO, U.S.A..

SOM CODE	MODEL	Description	Size
D260/28	7573610	Spilit Rubber Stopper	20mm
D260/27	7577110	Tear away Aluminuium Seal	20mm
D260/25	7578100	Hand Crimper	20mm

HAND CRIMPER

COMPANY : LABCONCO, U.S.A..

Ampule Manifold 48-Port

SOM CODE	MODEL	Description	DIAMENSION	WEIGHT
D54/154	7868500	type 304 stainless steel, tree-type, with 48 each 1/4" OD pipe stems that accommodate gum rubber or similar tubing to fit over any Labconco Ampule. Tubing is not included.	28.6" h x 5.0" w x 5.0" d (72.7 cm x 12.7 cm x 12.7 cm)	5.4 KG

Note : Please mention the product "SOM CODE" while making request for quotation and send it to dabab@somatco.com.