LABORATORY & SCIENTIFIC EQUIPMENTS - (Grain Grading & Testing Equipments /Mill feed Controller)

SANDBURG BARLEY OR WHEAT PEARLER
Company : Seedburo, USA.

The Seedburo Barley Pearler or WHEAT PEARLER is used to dehull barley for the determination of mellowness and heat-damaged kernel.
It uses a 30 grit carborundum stone and a No.7 mesh screen.

Som Code	Model	Description
D394/1	109W/C	Wheat Pearler With Motor 220V 50Hz.

The Wheat Pearler determines the hardness in wheat and comes with a 24 grip stone and a NO.8 mesh screen. The hulled grain is discharged through the spout, while chaff and hulls are passed through the screen into the catch drawer.

WHEAT PEARLER

SOM CODE : D36/5
Model : 400/C+/EX
COMPANY : SEEDBURO,U.S.A.

CLIPPER OFFICE TESTER & CLEANER

The Clipper Model 400 Office Tester & Cleaner offered by Seedburo is an extremely efficient cleaner for office and laboratory use. This machine will provide accurate, dependable performance for small lot cleaning, testing or sampling. It is commonly used in seed plants for sampling large lots of seed for correct screen selection on larger, commercial size cleaners. It is also widely used in university laboratories for agronomy research and testing and flower and vegetable growers use the Model 400 for specialized cleaning, grading and sizing. The Model 400 has a compact, portable design and features an eccentric (shoe) drive that uses two (2) 10" x 15" screens. One top screen for scalping, one bottom screen for cleaning and grading. Perforated metal or wire cloth screens are available in over 175 different sizes. Other features include a powerful bottom blast fan driven by a three-step pulley, adjustable slide on the air intake openings to provide intermediate air regulation and an optional, removable catchall with removable trays (shown) to catch air screenings. Actual dims. 25" L (42" L with catchall) x 17" W x 23" H. Domestic Ship wt. 100 lbs. Dims. 32" L x 22" W x 32" H, Export Ship wt. 200 lbs., Dims. 22” L x 36” W x 37” H.

Brouchure

SOM CODE : D36/50 & D343/12
Model : 2R & CDT/B
COMPANY : SEEDBURO,U.S.A.

CARTER-DAY DOCKAGE TESTER

Designed by Carter-Day to meet specifications of the USDA, the Carter-Day Dockage Tester provides accurate and uniform tests of grain samples for dockage. It is the official testing machine used in Federal Grain Inspection Service offices of the USDA, the department's licensed inspectors, state grain inspection offices, Canadian Grain Commission and throughout the commercial grain grading system. Official procedures have been established for testing wheat, corn, barley, rye, flaxseed, rice and grain sorghums. Instructions on the proper riddles and sieves to use, along with their procedures for testing these grains, are furnished with the tester. A partial list follows.

The Carter-Day Dockage Tester is furnished complete with a ½ HP electric motor. Actual dims. 41" L x 27" W x 55" H. Ship wt. with riddles and sieves from 450 lbs. to 475 lbs.

Brouchure

SOM CODE : D156/50
Model : 2-R
COMPANY : SEEDBURO,U.S.A.

GRAIN GRADING AND TESTING EQUIPMENT RIDDLE-SPRING WHEAT, WINTER WHEAT, RYE & DURUM

SOM CODE : D1254/36
Model : DMC750
COMPANY : SEEDBURO,U.S.A.

BURROWS MODEL DMC750 DIGITAL MOISTURE METER

The new Burrows Model DMC750 Moisture Meter has been designed to provide direct and accurate moisture readings on a variety of common commodities such as barley, corn, coffee, canola, beans, lentils, rice, soybean and wheat just to name a few. The Model 750 has a flow-through design and there is no need to pre-weigh samples. The temperature of each commodity is corrected prior to the display of the moisture reading.

The DMC is easy to use. Press the On/Off button on the front panel and the 750 will start a series of self-tests to check the operation of all components, taking about 10 seconds. Then select the grain to be tested, slowly pour the sample in the hopper until the display reads 100% and the tester makes an audible beep to indicate the hopper is full. The grain will drop automatically into the test cell and within 10 seconds; moisture percent is read on the display along with the temperature. The DMC750 can be user programmed to display results in English, French, Spanish or Portuguese. The built in thermometer is accurate from +/- 0.5º. Operating temperature is from 41ºF to 120ºF. The DMC750 can be connected to a printer with RS232C Bi-directional capabilities. Seedburo also offers a printer compatible with the DMC750, which includes a connection cable. The Burrows operates under a full range of power, from 100 to 240V, 50/60HZ, 1PH.

Net wt. 13 lbs., Ship wt. 16 lbs. Actual dims. 8”L X 12-1/2”W X13”H, Ship.dims. 17”L X 13”W X 20”H

SOM CODE : D36/3
Model : 801-10/B+DOM
COMPANY : SEEDBURO,U.S.A.

COUNT-A-PAK SEED COUNTER

The Seedburo 801 Count-A-Pak ® incorporates new microprocessor technology with the time proven reliable vibratory feeder bowl system. The 801 is a highly versatile and accurate combination seed counter. Operating functions include:

TOTALIZE: Registers a complete count on a pre-weighed or volumetrically measured portion.

BATCH COUNT: Accurately counts a predetermined number of seeds in a single batch.

REPEAT BATCH: Allows for the continual repetition of a single batch count.

MULTIPLE BATCH: Can be set to count numerous batches with different seed counts and quantities.

The membrane touch panel enables the user to program the 801 while visually keeping track of the seed count; batch or group count; sensitivity and speed settings. All functions or adjustments are controlled from this user-friendly panel. The microprocessor controls also allow for a bag detection system that prevents double filling of bags or spilling when a bag is not present. The 801 control console is adaptable for either a 7" or 10" feeder base. Serial data interface capabilities allow for direct printer attachment, data logger or computer interface. The optional foot switch gives total hands free operation.

Electromagnetic vibratory action moves the seeds upward along the track. Selective devices in the bowl arrange the seeds into a single file, one layer deep, before they are discharged. As a seed travels down the chute, it is detected by a microprocessor controlled sensor. Unlike "electric-eye" counters, this sensor sensitivity is adjustable. This means that chaff or other undesirable matter will not be counted. Quick disconnect feature allows for easy and complete clean-out of the feeder bowl. The 801 is available with a 7", 10" or 10" shallow feeder bowl to accommodate seed sizes from small vegetable to large grain.

SPECIFICATIONS: Power Requirements: Specify Voltage (115V or 230V) and Cycle (50Hz or 60Hz). Dims & Wts: Operator Control Console: Dims. 13 3/4" L x 11" W x 8" H. Ship wt. 19" L x 14" W x 13" H. Net wt. 18 lbs. Ship wt. 21 lbs. Feeder Base: Dims. 15 ¼" L x 13" W x 15" H. Ship Dims. 25" L x 17" W x 16" H. Net Wt. 40 lbs, Ship Wt. 45 lbs.

Brouchure

Sample Mill Feed Controller
Company : Seedburo, USA.

The Feed Controller provides a means for uniformly introducing coarse sample material into the Cyclone Sample Mill. A 30 to 40 gram sample is poured into the hopper and is immediately conveyed into the mill.

Som Code	Model	Description
D394/2	3010FC/C	Feed Controller 42 RPM 220V/50Hz.

Large quantities may be handled by using a poly bag in place of the regular sample bottle.

FEED CONTROLLER

Som Code : D156/51
Company : Seedburo, USA.

SIEVE, 5/64 INCH (0.78 INCH) D PERF. (WHEAT)

Som Code : D343
Company : Seedburo, USA.

Agricultural Grain Testing Implement.

SOM CODE : D36/5
Model : 2R
COMPANY : SEEDBURO,U.S.A.

SIEVE,5/64 INCH( 0.78 INCH) D PERF (WHEAT)

Note : Please mention the product "SOM CODE" while making request for quotation and send it to dabab@somatco.com.