SOM CODE : 1896/61
Model No : 3365000
COMPANY : IKA, GERMANY.

TEST TUBE SHAKER.
Designed for mixing small test samples with a touch function.

- Small, compact and reliable
- For small containers up to 30 mm in diameter.
- Fixed speed (2800 rpm)
- Includes light 12V power pack set.

Specifications :

Shaking motion	Orbital
Shaking stroke	4.5 mm
Shaken item/quantity	1 test tube/50 ml (max.)
Motor rating input / output	1.2 W / 0.8 W
Max. ON-time	100 %
Speed	2800 rpm (fixed)
Dimensions (dia x H)	100 x 70 mm
Weight	0.55 kg
Voltage /Frequency	230 V 50/60 Hz 115 V 50/60 Hz.

SOM CODE : D304/4
Model No : 58816-116
COMPANY : VWR, U.S.A.

VORTEX MIXER MULTI-TUBE, 220V.
-

Mix 50 Tubes at One Time

Auto or Timed Modes

VWR Two-Year Limited Warranty

These vortexers are designed to hold multiple test tubes, vials, or cylinders. The vortexing action is created by securing the top of the vessel in place while allowing the bottom to move freely in a defined 3.6mm eccentric orbit. Two stainless steel posts hold support plate securely in place for quiet, rattle-free mixing. Support plate is easily adjusted by loosening knobs and lifting plate up and down. The circular groove around the top of the taller post allows the support plate to swing away from tray for easy removal of samples. The suction-cup feet dampen motion and prevent sliding on work surface. Constructed of rugged stainless steel with corrosion-resistant paint. Equipped with a powerful, permanent magnet motor with sealed ball bearings. Motor is rated for continuous duty.

VWR analog vortexers feature solid-state electronic control that allows adjustable speed from 1200–2400 rpm and an automatic timer adjustable from 0–60 seconds for simple repeat procedures. Conveniently angled front panel features main power switch, knobs for speed and timer adjustment, and mode switch with timed mode, off, and continuous mode operations.

VWR Signature digital vortexers feature a microprocessor controller for digital programming of both speed and time, along with a pulse feature for difficult mixing applications. Ideal for applications that require accuracy and repeatability. Speed and time can be set simply by pressing “up” and “down” arrows. The speed range is 500–2500rpm, set in 25rpm increments. Digital readouts of both speed and time are easily viewed from an easy-to-read LED display. Timer can be programmed to run 1–9999 minutes (over 160 hours) or can be set to run in continuous mode. The extremely versatile pulsing feature stops and starts the unit in predetermined increments to add further agitation to mixing process. Pulsing program can be set from 1 second on/off up to 59 seconds on/off, allowing for a wide variety of pulsing combinations. Pulsing can be operated in both timed and continuous mode.

The 120V vortexers are UL listed.

Brouchure

Model No : 58816-116

Electrical :

230V, 50/60Hz, 75W

Diamention :

38.1 x 23.5 x 39.4 (15 x 9¹/₄ x 15¹/₂)

Shipping Weight,kg,lbs :

20.4(45)

SOM CODE : D344/4
Model No : 58816-123
COMPANY : VWR, U.S.A.

VORTEXER VWR MINI 230V - 945301

Designed for gentle shaking or vigorous vortexing of samples in a wide variety of applications. Use with flasks, beakers, tubes, and microwell plates. Constructed using a heavy base casting with corrosion-resistant enamel finish, units remain stable on work surfaces.

The fixed speed vortex mixers are one-touch units designed for high speed mixing for vigorous vortexing of samples at 3200rpm. Mixing starts when the head is pressed down.

The analog vortex mixers have a variable speed control from 100–3200rpm, which allows low rpm startup for gentle shaking or high-speed mixing for vigorous vortexing of samples. Units can be operated in touch mode when depressing the cup head or in a continuous mode. Models feature a three-way power switch and a speed knob with variable 1 to 10 dial marks.

UL and C-UL listed. CE marked.

Dimensions: 12.2W x 17.3D x 12.2H cm (4¹³/₁₆ x 6¹³/₁₆ x 4¹³/₁₆")

Weight: 5 kg (11 lbs.)

SOM CODE : 1897/8
Model : 34528/34002
Made In Netherland.

Test Tube Rotator With Stainless Steel Disc Tube 11/15
& 14/18mm.

Product description :
-For mixing, diffusion, dialysing, etc.
-Housing of enamelled steel.
-A sparkless, synchronous, geared motor.
-Slow rotation speed, 10 rpm, permits tube exchange while operation.
-Can be set continuously at an angle between 90⁰ and 270⁰.
-Operation on 220V/50Hz.
-Outer dimension : 200 x 200 x 205 mm.
-Weight : 4 kg

Brouchure

SOM CODE : 1897/6
Model No : 34524
COMPANY : SNIJDERS, NETHERLAND.

PRESS-TO-MIX 220V / 60Hz.
- Vigorous mixing action in test tubes.
- Mixing action starts upon depression of the rubber cup with the test tube.
- Continuous adjustable speed control allows for pre-set mixing speeds.
- Illuminated tumble switch for choosing Press-To-Mix mode or continuous
mixing mode.
- Operation on 220 V, 50 Hz.
- Outer dimension : 210 x 145 x 145 mm.(l x w x h)
- Weight : 2 kg/4,4 lbs.

Brouchure

SOM CODE : 1888/9
Model No : 34201E
COMPANY : SNIJDERS, NETHERLAND.

MIXER ( ROCK N'ROLLER ) 220V 50Hz / 60Hz.
- Keeps the contents of closed tubes in gentle motion by
rocking while rolling.
- 14 Stainless Steel rotating bars, each: 208 x 10 mm with
inters pace of 11 mm.
- Rolling speed : 10 rpm.
- Rocking frequency : 5 cycles/min. at 35⁰ movement.
- Operation on 220 V, 50 Hz.

Brouchure

SOM CODE : 1897/4
Model No : M37610-26
COMPANY : THERMOLYNE, USA.

MIXER VORTEX MAXI-MIX II 100-3000 RPM 240V.
- Variable Speed
- Touch on mode
- Single tube cup, multiple tube pad.
Applications :
- Mixing media in test tube.
- Mixing cytogenetic suspension in centrifuge tubes.
- Enzymatic and RIA assays.
- Vortexing cell suspension.
- Vortexing drugs extraction.
- Atomic absorption sample preparation.
- Nelson's assay for reducing sugars.
Specification :
Volts : 240V.
Electrical Amps : 0.26
Frequency : 50 Hz
Operating Speed : 100-3000

Brouchure

SOM CODE : 1887/176
Model : ZX3F20230176
COMPANY : VELP SCIENTIFIC,ITALY.

Vortex mixer 230V 50Hz

Vortex mixer designed for mixing solutions in test tubes or small flasks with a circular, oscillating movement.
ZX3, equipped with two operation modes - manual and continuous - with the possibility to adjust the speed between 50 and 2400 rpm

Brouchure

SOM CODE : 1887/177
Model :F202A0173
COMPANY : VELP SCIENTIFIC,ITALY.

VORTEX MIXER CLASSIC 100-240V / 50-60HZ WITH 4 HEADS-CUSTOMIZABLE TOP FOAM A13 , STAND FOR 19 MICRVIALS EPPINDORF 1.5ML A12, FOAM STAND FOR 5 TEST TUBE DIA 16MM A14 & FORM STAND FOR 4 TEST TUBES DIA 29MM A19

Vortex Classic is the ultimate expression of continuous product evolution.
Classic is a solution suited to the greatest variety of mixing needs. It is able to provide the highest performance ratings in terms of speed while at the same time ensuring reliability and safety.
It is equipped with two operation modes, with the possibility to change the vibration frequency:
Touch - the automatic “Touch” mode starts the shaking with a slight amount of pressure applied by the test tube on the rubber cup.
Continuous – continuous operation mode that, when combined with the use of a wide range of accessories (optional), makes the instrument suited to a large variety of needs.
Classic also has a special lever (Touch - Platform) that, when properly positioned, ensures maximum stability of the instrument according the operation mode selected.
Its advanced performance places the instrument at the highest standards of the market. VORTEX CLASSIC comes complete with a standard cup for single test tube.

Construction material:	zinc alloy and techno polymer
Power:	15 W
Power supply:	100-240 V / 50-60 Hz.
Weight:	2,2 Kg (4.9 lb)
Dimension (WxHxD):	180x70x220 mm (7.1x2.8x8.7in)

Brouchure

SOM CODE : 1897/100
LABORATORY VORTEX MIXER.
MADE IN TAIWAN.

MIXER VORTEX 3000RPM & 100-3200RPM 220V/60Hz.

Specifications :

Som Code	1897/1000	1897/2000
Model	VM-1000 Tube Mixer	VM-2000 Vortex Mixer
Switch	Full on and touch
Speed	Variable speed Max : 300rpm
Single tube holder	Small rubber head
Large plate	Size 95mm. Can use test tube or flask
Power	110/220V, 50/60Hz, 1A/2A
Dimension	12.5 x 16 x 18(H) cm	12.5 x 12.5 x 16(H) cm

Model : VM-1000
Tube Mixer

Model : VM-2000
Vortex Mixer

SOM CODE : 1888/95
Model : 7204008
COMPANY : PAUL MARIENFELD, Germany.

Swivel roller mixer

Swivel roller mixer for thoroughly mixing of samples and cell suspensions , 35 4.p.m., dimensions 430x180x95 mm, with 5 rolls of PVC of 330 mm length, CE,230V/50-60 Hz.

COMPANY : VWR, USA

Accessories for VWR® and VWR Signature™ Vortex Mixers

Som Code	Model	Description
D344/5	58816-130	FOAM INSERT KIT W/RETAINER
D344/6	58816-136	VESSEL HARNESS F/MIXER PK2
D344/7	58816-138	INSERT ST FM 9-13MM TB PK2
D344/8	12620-876	MICROTUBE FOAM RACK PK2
D344/9	12620-878	RACK MICROWELL PLATE PK2

The tube holder kit (58816-130) consists of an insert retainer for securing vessels and tube holders, two vessel harnesses for holding flasks and bottles, one 9–13mm tube holder for 5mL culture tubes, one 14–19mm tube holder for 15mL centrifuge tubes, and one 20–25mm tube holder for 50mL centrifuge tubes. The microtube and microplate holder kit (12620-874) includes a microtube holder for forty-eight 0.25–2.0mL microcentrifuge tubes, a microplate holder for a 96- or 384-well plate or a deep well block, and an insert retainer. The single tube holder (12620-898) mounts on the top of the vortex mixers for hands-free mixing of 15–50mL centrifuge tubes. Adapters are available to use with the single tube holder for twenty-four 0.5mL microtubes and for eighteen 1.5–2.0mL microtubes. An adapter plate is also available to mount the single tube holder to other competitive vortex mixers.

SOM CODE : D344/11
Model No : 58816-156
COMPANY : VWR, U.S.A.

CUP HEAD 945225

SOM CODE : D22/76
Model No : M63210-33
COMPANY : THERMOLYNE, USA.

MAXI-MIX PLUS 230V CE SL NO:1271040798733

SOM CODE : D344/10
MODEL : 58815-210
COMPANY : VWR, USA

CUP HEAD POP OFF F /VORTEX

SOM CODE : D1254/28
MODEL : 33994-304
COMPANY : VWR, USA

MINIVORTEXER MV1 230V

Note : Please mention the product " SOM CODE " while making request for quotation and send it to dabab@somatco.com.