PERISTALTIC PUMP SYSTEMS (PD5001 & PD5006)
COMPANY : VWR, U.S.A.
|D90/78||82020-078||Peristaltic Pump Systems|
|D90/102||82020-102||PUMP HEAD SP QUICK 1.6MM|
Standard pump drives are ideal for use with applications involving corrosive solvents or sterilized media. Convenient large dials allow analog speed adjustment of condenser motor. Pump drives feature selectable rotation direction, overheat protection, and a housing that allows pump drives to be stacked up to three high. Electronic speed control is accurate to ±2%. Flow rates are accurate to ±5%.
All pump drives meet protection class IP 30 (DIN 40050) and are CE marked.
The PD 5001 pump drive with multi-channel adaptor may be used in combination with multi-channel pump heads and cassettes. Choose multi-channel pump heads that accept either four small cassettes, eight medium or four large cassettes, or 12 small cassettes.
→ Electrical : 115V, 50/60Hz, 150W
→ Maximum Viscosity : 10,000 cP
→ Permissible Ambient Temperature : 0 to 40°C (32 to 104°F)
→ Dimensions : 16.6W x 25.6D x 22.5H cm (69/16 x 10 x 87/8")
COMPANY : HARVARD ENGLAND
|D341/88||73-0114||ISM 827/230V ROLLER PUMP REGLO ANALOGUE 4 CHANNELS 0.003-35 ML/MIN|
The REGLO Analog Peristaltic Pump has a variable speed drive with start/stop, speed, and direction functions. This analog pump is available in either 2 or 4 channel versions and uses MS/CS Click 'n' Go Cassettes with 3-Stop Collared Tubing.
→ Start/Stop, Speed and Direction Functions
→ Flow Rates from 0.003 to 58 ml/min
→ Uses snap-on MS/CS Click ‘n’ Go Cassettes, see page A60
→ Uses 3-Stop Collared Tubing, see page A61
→ Analog Interface
→ 2 Digit Potentiometer and Overload Indicators
→ 2 or 4 Channels Available
COMPANY : BMS,CANADA
→ Programmable peristaltic pump
→ Up to 20 programs can be stored
→ 2 operation modes: manual or automatic
LANGUAGES : English, French, Spanish and German
→ Dispensed volume ranges from 1 ml to 9999 ml
→ +/- 0,1 ml below 20 ml
→ +/- 1% above 20 ml according to tubing size
→ Pump speed: programmable from 30 to 500 rpm
→ Microprocessor controlled pump
→ Standby mode: avoids agar solidification in tubing during dispensing interruption
→ In automatic mode: programming of the dispensing number and the time limit between each dose
→ Optional printer
→ Easy load pump head for different diameter tubing.
Note : Please mention the product "SOM CODE" while making request for quotation and send it to *****@somatco.com