SOMATCO Supplies  Oxygen Concentrators, Oxygen Cylinders, Nebulizers, Humidifiers, Microscopes,  Laboratory Boiling Glasswares,  Laboratory Blown & pressed Glasswares,  Laboratory Bottles, Volumetric Glasswares,  Laboratory apparatus, Laboratory Coats, Hospital Electric Beds, Hospital Manual Beds, Dental Unit, Ovens, Incubators, Centrifuges, Balances, Thermometers, Shakers, Skeleton Models, Digital BP Meters, Mercury BP Meters, Wheel Chairs, Stethoscopes, Chemicals, Stirrers, Stirring Motors, Suction  Aspirators, Digital Autoclaves, Amplitron Thermal Cycler, Opthalmoscopes, Oscilloscopes, Otoscopes, Oxygen Regulators, Ph meters, Projectors, Radioactive Source Kit, Refrigerators.

شركة سوماتكو ترحب بكم  ويسرها خدمتكم يتوفر لدينا اجهزة توليد اكسجين ، اجهزة انعاش للربو ، مرطب للجو حار وبارد ، سماعات طبيب ، بالطو طبيب ، جهاز كشف الاذن ، جهاز كشف قاع العين ،جهاز قياس الضغط زئبقي والكتروني ، فرن تعقيم ، حاضنه الكترونيه ،سنترفيوج ، ميكرسكوب بجميع الانواع ، زجاجيات للمختبر ، كيماويات ، خرائط تعليميه ، كراسي معوقين ، اسره مرضي كهربائيه ويدويه ، موازين حساسه ، ورق ترشيح ، ادوات جراحيه ، ثلاجة لحفظ الدم ، مراتب طبيه والكثير من التجهيزات الطبيه والعلميه والمخبريه

                    


COMPANY : HANNA, ITALY.
 

 BENCH TOP PH METER HI 2210 & HI 2211

HI 2211

HANNA’s new HI 2211 is a microprocessor based pH, mV and temperature benchtop meter. It features an extra large LCD that displays pH or mV and temperature simultaneously. The extra large LCD (6.25” x 1.5”) can be viewed from a distance in a lab.

This instrument can measure pH from -2.00 to 16.00 and can be calibrated at 1 or 2 points using 5 standard buffers. During calibration, prompts on the LCD guide the user through the process. Temperature compensation of the pH measurement can be automatic or manual between -9.9 to 120°C.

HI 2211 features a dual mV range (±399.9 or ±2000 mV) which can be used for ISE measurements, ORP measurements or to check the offset and slope of the pH electrode. Other features include a measurement memory function and a reading stability indicator. The HI 2211 is supplied with an HI 1131B glass body combination pH electrode, HI 7662 temperature probe, electrode holder, power adapter and buffer solutions to get you started.

HI 2210

For less demanding applications, HANNA’s HI 2210 includes all of the features of the HI 2211 with the exception of mV mode.

 

Brouchure 


SOM CODE : 1462/221
M
odel :
COMPANY : HANNA, ITALY.

PH/DC/MV ORP BENCH METER, GLP,RS 132.

Calibration CheckTM pH Meters

A pH electrode, when it is properly manufactured and is kept clean, will retain its physical characteristics for a long time. A common problem associated with pH measurements is the use of a pH electrode that has not been properly cleaned. This is very important because during calibration the instrument assumes that the electrode used is clean, and the standardization curve created during the calibration process will remain the same until the next calibration. pH meters on the market today will allow an offset of approximately ± 60 mV. The deviation from 0 mV is not unusual; in fact, it represents the true characteristics of the pH electrode. The deviation from 0 mV becomes a problem if it is the result of calibrating a dirty electrode. 

 

    Brouchure 

 

 

 
 Range   pH / 0C

-2.00 to 16.00 / -20.0 to 120.0

 mV/ppm  ±699.9; ±2000 
 Resolution   pH/ 0C  0.01 /  0.1 
 mV/ppm  0.1 (±699.9); 1 (±2000) 
 Accuracy  pH/ 0C  ±0.01 /
 mV/ppm  ±0.2 (±699.9); ±1 (±2000) 
 Typical EMC Deviation   + 0.01 pH; +0.50C;+0.3 mV; +1% F.S.
 pH Calibration  Automatic 1 or 2 points (pH 1.68, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45)
 Temperature Compensation  Manual (MTC) or Automatic (ATC) temperature compensation from -20.0 to 120.0°C
 Electrode  glass body, single junction refillable cell, BNC + pin (included)
 Temperature probe  stainless steel probe (included)
 Power supply  12VDC adapter (included)
 Dimensions  240 x 182 x 74 mm (9.4 x 7.1 x 2.9”)
 Weight  1.1 Kg (2.5 lb.)

 

 

Model : HI 221


SOM CODE : 1462/301
M
odel : pH301
COMPANY : HANNA, ITALY.

GLP Bench pH/mV/Ion/0C Meter.
The pH calibration can be performed at 1, 2 or 3 points with 6 memorized pH values.

The opto-isolated RS232 is bi-directional, so that the user can operate the meter from the computer key-board. The pH 301 logging function can be used in the pH, mV and ISE modes. The logging interval is user-selectable. The memory is capable 
of retaining up to 99 different lots of up to 8000 samples.

 SOM CODE  1462/301
 Model  pH 301
 Range   pH / 0C

 -1.999 to 19.999 pH; -9.9 to 120.00C;

 mV/ppm  +1999.9 mV; 0.001 to 19999
 Resolution   pH/ 0C  0.01 & 0.001 pH; 0.10C
 mV/ppm  0.1 mV; 0.001;0.01; 0.1; 1
 Accuracy  pH/ 0C  + 0.002 pH; +0.50C
 mV/ppm  +0.1 mV ; +1% F.S.
 Typical EMC Deviation   + 0.01 pH; +0.50C;+0.3 mV; +1% F.S.
 pH Calibration  1,2 or 3 points with 6 memorized buffers.
 Temperature Compensation  Automatic or manual from -9.9 to 1200
 Electrode  HI 1131B
 Temperature probe  HI7669/2W with 1 m cable.
 Power supply  12VDC adapter
 Dimensions  280 x 200 x 75 mm
 Weight  1.3 Kg.

   Brouchure 


SOM CODE : 1462/302
M
odel : pH302+HI76405
COMPANY : HANNA, ITALY.

pH/mV/DC PRINTING METER WITH ELECTRODE.
The pH 302 fulfills the needs of general purpose and analytical laboratories for a single instrument to 
measure pH, millivolt (mV), Oxidation Reduction Potential (ORP), plus specific ions (ISE).
The oversized display is easy to read and present step-by-step guidance for calibration. 

Instructions are also provide on the display to correct calibration errors and guarantees optimal performance 
while performing your measurements. Advance memory features also enable you to recall calibration data to 
comply with Good Laboratory Practices (GLP) protocols.

Programmable Functions :
- Sampling cycle - set the sample number, time and date.
- Custom calibration - calibrate the meter using nonstandard buffer values
- GLP Compliance - prints calibration data with date, time, pH offset and slope
- Time Study 1 - log and print pH, mV, and temperature to a pre-set interval.
- Time Study 2 - log and print pH, mV, and temperature to a pre-set parameter.
- Alarms - set upper and lower pH or mV limits
- International - choice different languages for printed data.
- ISE - print the ion concentration for pH values.
- Connectivity - sets up communication with your computer.

 SOM CODE 1462/302
 Model  pH 302
 Range   pH 

 0.00 to 14.00

 mV  +399.9 (ISE) ; +1999 (ORP)
 oC  -9.9 to 120.0
 Resolution   pH/ 0C  0.01pH &  0.10C
 mV  0.1(ISE) ; 1(ORP)
 Accuracy  pH/ 0C  + 0.01 pH; +0.50C
 mV  +0.3 (ISE); +1(ORP) 
 Typical EMC Deviation   + 0.01 pH; +0.50C;+0.3 mV; +1% .
 pH Calibration  1or 2 points with 3 memorized buffers.
 Temperature Compensation  Automatic or manual from -9.9 to 1200
 Electrode  HI 1131B combination, glass body, refillable, 
 BNC connector (included)
 Temperature probe HI7669/2W, thermistor type with 1 m cable.
 Input Impedance 1012 Ohm
 Inputs  BNC/Reference/ATC
 Output  Bi-Directional RS232 opto-isolated
 Power supply 12VDC adapter
 Environment  0 to 500C; RH 95%
 Dimensions  280 x 200 x 75 mm
 Weight  1.3 Kg.

 

   Brouchure 

Model : pH302


SOM CODE : 1462/211  
Model : pH211
COMPANY : HANNA, ITALY.

pH/mV  Bench Meter With Electrode, Probe & Solution.
The new pH211 have been designed to be simple without sacrificing accuracy. meters measures the pH from 0 to 14 and temperature from 0 to 100 with 0.01 pH and 0.50C accuracy. The pH211 can also measures mV in two ranges of +399.9 and +1999 mV in conjunction with ISE's and ORP electrodes. The large display shows pH or mV and temperature at same time.

 SOM CODE 1462/211
 Model  pH 211
 Range  pH / 0C

 0.00 to 14.0 pH; 0.0 to100.00C;

 mV  +399.9 mV (ISE); +1999 mV (ORP)
 Resolution   pH / 0C  0.01 pH; 0.10C
 mV  0.1 mV (ISE); 1 mV (ORP)
 Accuracy  pH / 0C  + 0.01 pH; +0.50C
 mV  +0.2 mV (ISE); +1 mV (ORP)
 Typical EMC Deviation   + 0.03 pH; +0.30C;+2 mV
 pH Calibration  Automatic 1 or 2 points with 5 memorize buffer.
 Temperature Compensation  Automatic from 0 to 1000C
 Electrode  HI 1131B
 Temperature probe HI7669/2W with 1 m cable.
 Power supply 12VDC
 Dimensions  240 x 182 x 74 mm
 Weight  1.1 Kg.

 

   Brouchure 

Model : pH211
 

 


SOM CODE : 1462/209.
Model : pH209
COMPANY : HANNA, ITALY.

pH/mV  Bench Meter For School With Electrode.
The pH offset and slope are manually adjustable in order to display the calibration concept and the electrode characteristic to the students. Measurement can be performed for pH with manual temperature compensation as well as for REDOX (Reduction Oxidation Potential). The selected temperature is displayed to ensure better accuracy.
The LCD displays the temperature comprehensively while manually compensating for its effects.

Features :
- Simple 2-Button Operation.
- Manual Calibration.
- Long Battery Life.

 SOM CODE 1462/209
 Model  pH 209
 Range   pH 

 0.00 to 14.0 

 mV  +1999
 Resolution   pH  0.01 
 mV  1 
 Accuracy  pH  + 0.01
 mV  +1
 Typical EMC Deviation   + 0.03 pH; +2 mV
 pH Calibration  Automatic 1 or 2 points through offset and 
 slope knobs
 Temperature Compensation  Automatic from 0 to 1000C
 Electrode  HI 1332B
 Temperature Impedance  1012 ohm
 Power supply  12VDC
 Dimensions  240 x 182 x 74 mm
 Weight  1.0 K g.

 

  Brouchure 

Model : pH209


SOM CODE : 1462/110
Model : HI9025C
COMPANY : HANNA, ITALY.

pH/mV/DC Meter Waterproof  Micro 0.00 To 14.00 pH .
HI 9025 microprocessor-based pH meters in waterproof casings. HI 9025 measures pH, 
ion concentration and ORP in the mV range.

Features :
- Ready functions.
- Rugged, Waterproof Construction's
- Dual level display with Graphic  symbol.

Specifications :

 SOM CODE  1462/110
 Model  HI 9025C
 Range pH  0.00 to 14.00
 Resolution pH  0.01
 Accuracy  + 0.01
 Typical EMC  + 0.01
 Temperature 
 Compensation
 Automatic or Manual from   
 0 to 1000C
 Dimensions  196 x 80 x 60 mm
 Weight  425 g.


   Brouchure 


SOM CODE : 1462/23
Model : HI9210N
COMPANY : HANNA, ITALY.

pH Meter With Electrode waterproof  Portable.
The HI 9210N is heavy-duty pH meter is designed to provide laboratory result and accuracy under harsh industrial conditions. The unit can be calibrated at any pH buffer value.

 SOM CODE  1462/23
 Model  HI 9210N
 Range   pH

 0.00 to 14.0 pH

 Temperature  0.0 to 70.00C
 Resolution   pH  0.01
 Temperature   0.10C
 Accuracy  pH  + 0.02
 Temperature   +0.50C
 Typical EMC 
 Deviation
 pH  + 0.02
 Temperature  +0.50
 pH Calibration  Manual 2 points through trimmers.
 Temperature Compensation  Automatic from 0 to 700C
 Electrode  HI 1217D
 Battery Type/Life  4x1.5V AA/ 2000 hours
 Dimensions  196 x 80 x 60 mm
 Weight  320 g.

 

  Brouchure 

 


SOM CODE : 1462/31.
Model : HI991301
COMPANY : HANNA, ITALY.

pH/EC/TDS/DC Meter With Water Proof Case & Electrode.

Features
:
- 4 instruments in one : pH, conductivity, TDS and temperature all in one meter with a single probe.
- Tailor made for your application : Customized pH/EC calibration, select EC/TDS conversion factor and temperature 
  coefficient and choose the temperature scale that best fits your application.
- Easy of use, accuracy and durability : Two button operation, microprocessor based, rugged instrument and probe.

 SOM CODE 1462/31
 Model  HI 991301N
 Range 

 0.00 to 14.00 pH; 0.0 to 60.00C;
 0.00 to 19.99 mS/cm (EC); 0.00 to 10.00 pt. (TDS)

 Resolution   0.01pH; 0.10C; 0.01mS/cm; 0.01 pt.
 Accuracy  + 0.01pH; + 0.50C; + 2% Full Scale (EC/TDS)
 Typical EMC Deviation  + 0.3 pH; + 10C; + 2% Full Scale (EC/TDS)
 Temperature 
 Compensation
 pH : Automatic from 0 to 600C
 Probe  HI 1288 pH/EC/TDS probe with built-in 
 temperature sensor
 Battery Life/Type  500 hours approx. continuous use/4 x 1.5V AAA
 Dimensions  143 x 80 x 38 mm
 Weight  320 g.

Brouchure 

 


SOM CODE : 1462/32
Model : HI991300
COMPANY : HANNA, ITALY.

PH/EC/TDS/DC METER W/WATER PROOF CASE & ELECTRODE, RANGE PH 0 - 14, 0-3999US EC, 0 - 2000PPM TDS..

HANNA® offers you a choice of 2 meters to meet your exacting requirements. HI 991300 and HI 991301 both measure pH, electro-conductivity, total dissolved solids and temperature in a single instrument. To increase precision, you can select the meter which will work best with your range of conductivity, from purified to brackish waters. There are only 2 buttons, yet you can select from a range of calibration buffers and even the temperature scale (°C or °F) most familiar to you. The housing is waterproof and rated for IP 67 conditions. The multi-parameter probe, HI 1288, includes pH, EC/TDS and temperature in one convenient, rugged handle. Other user selectable features include different TDS factors from 0.45 to 1.00, and a range of temperature coefficients (ß) from 0.0 to 2.4% for greater consistency and reproducibility. Also selectable are standardized buffer recognition values. To ensure against interference from transient electrical noise, a solid-state amplifier is integrated into the probe.
Specification:

 SOM CODE  1462/32
 Model  HI 991300
 Range 

pH 0.00 to 14.00 pH

EC 0 to 3999 µS/cm
TDS 0 to 2000 ppm (mg/L)
Temperature 0.0 to 60.0°C (32.0 to 140.0°F)
 Resolution   pH 0.01 pH
EC 1 µS/cm
TDS 1 ppm
Temperature 0.1°C (0.1°F)
 Accuracy pH ±0.01 pH
EC ±2% F.S.
TDS ±2% F.S.
Temperature ±0.5°C (±1.0°F)
 Temperature 
 Compensation
 pH : Automatic
EC/TDS Automatic with selectable ß from 0.0 to 2.4%/°C with 0.1 increments
 Auto Shut-off  After 8 minutes
 Battery Life/Type  4 x 1.5V AAA / approx. 500 hours of continuous use
 Dimensions  150 x 80 x 36 mm (5.9 x 3.1 x 1.4")
 Weight 210 g (7.4 oz.)

 

Brouchure 


SOM CODE : 1462/315
Model : HI8314.
COMPANY : HANNA, ITALY.

pH/mV/DC Meter With Electrode ATC 0.00 to 14.00 pH.

HI 8314
is a portable, hand-held multipurpose meter that combines accurate measurement of pH/mV/0C and ATC with a membrane keypad.

Features :
-Dual measurement system.
-Menu driven operation.
-Simultaneous readout of pH, conductivity & temperature.
-mV resolution to 0.1
-Individual/combined use of sensors.
-Fully G.L.P compliant.


Specification:

 SOM CODE  1462/314
 Model   HI 8314
 Range   0.00 to 14.0 pH
 0 to + 1999 mV
 0.0 to 1000C
 Resolution   0.01 pH
 1 mV
 0.1 0C
 Accuracy  +0.01pH
 Typical EMC  +0.05 pH
 Dimensions  185 x 82 x 45 mm
 Weight  570 g.

 

Brouchure 


SOM CODE : 1462/1
Model : HI8014
COMPANY : HANNA, ITALY.

pH/mV/DC Meter W/Electrode 0.00/14.00 pH Battery.
HI 8014 affordable with Calibration at any Buffer - Ideally for education field.
Measurements can be performed by the pH and REDOX( reduction/oxidation potential) with manual temperature compensation.

Features :
- Easy-to-operate.
- Manual Calibration.
- Manual Temperature Compensation.

Specifications :

 SOM CODE 1462/1
 Model  HI 8014
 Range pH

 0.00 to 14.00

 Resolution pH  0.01
 Accuracy  + 0.01
 Typical EMC  + 0.05
 Temperature 
 Compensation
 Manual from 0 to 105%
 Dimensions  185 x 82 x 45 mm
 Weight  520 g.

 

Brouchure 


SOM CODE : 1462/250
M
odel : HI4521
COMPANY : HANNA, ITALY

PH AND CONDUCTIVITY (USP) BENCH METER. (COLOR SECREN BENCH PH CONDUCTIVITY. IN KIT 230V. RANGE PH -2.000 TO 20.000, Mv +-2000, CONDUCTIVITY RANGE: 999.9 Ms/CM; 1000 Ms/CM, RESISTIVITY 10.0 TO 100.0 Mohm.cm, TDS 100.0 TO 400.0 PPT., SALINITY 0.0 TO 400.0%

HI 4521 is a USP compliant dual-channel, research-grade laboratory pH/EC bench meter with a backlit 240 x 320 dot-matrix color screen and millesimal measuring resolution. Features include auto-logging and real-time graphic displays, auto-end point mode and a fully customizable SETUP button. This unit allows for automatic (ATC) or manual (MTC) temperature compensation. For accountability, on-screen GLP data displays calibration information, including buffer values and expiration date concurrent to measurement readout and logged graph data. For ISE measurements, an ionic strength constant value is stored with GLP data. During ISE Mode, the user has a choice of several incremental methods. With the option to choose up to 5 calibration points for pH - selected from a list of 5 custom and 8 memorized buffers - the system can be fitted to any desired measuring range. Our exclusive Calibration Check™ diagnostics system keeps the user informed about the quality and condition of the electrode and buffer groups for calibration. An enhanced warning system, with acoustic signals alerts the user when measuring outside the calibration range. This system will also remind the user when a new calibration is due, or when the wrong buffer is being employed during calibration.

The user may consult the on-board contextual help from any mode simply by pressing the HELP menu. All the features are available in English, Italian, French and Spanish. Galvanically isolated measurement channels of HI 4521 eliminates interference and instability. HI 4521 performs all 3 stages of USP <645> conductivity tests for water quality and provides clear directions on how to run each testing stage. This instrument automatically monitors the temperature, conductivity and stability during testing and determines whether a sample is within UPS limit

Specifications:

 Range pH

-2.0 to 20.0; -2.00 to 20.00; -2.000 to 20.000 pH

 Resolution pH 0.1 pH; 0.01 pH;0.001 pH
 Accuracy ±0.1 pH; ±0.01 pH; ±0.002 pH
 Temperature 
 Compensation
 Automatic or manual from -20.0 to 120.0°C (-4.0 to 248.0°F)
 Dimensions  159 x 230 x 93 mm (6.3 x 9.1 x 3.7")
 Weight 800 g (1.8 lb.)

 

Brouchure 


SOM CODE : 1462/129
M
odel : HI98129
COMPANY : HANNA, ITALY.

pH / EC / 0C Pocket Tester.
The new waterproof HI98129 tester from Hanna are designed for high accuracy pH, EC/TDS and temperature measurements. No more switching meters to measure the
pH and then the EC or TDS of a solution. This tester also have a stability indicator and hold feature to prompt the user when to take the reading and freeze the display for easy and accurate recording.

- Rugged, Floating Waterproof Casing.
- Temperature in 0C and 0F.
- Measurement Stability Indicator.
- Replaceable pH Electrode Featuring and Extendable Junction.
- Automatic pH calibration at standard as well as NIST Buffer Sets.
- Automatic Temperature Compensation (ATC).
- Adjustable Temperature Coefficient Factor.

Specification:

 SOM CODE 1462/129
 Model  HI98129
 Range 

 0.00 to 14.00 pH; 0.0 to 60.00C;
 0 to 3999 mS/cm (EC); 0 to 2000 ppm. (TDS)

 Resolution   0.01pH; 0.10C; 1mS/cm; 1 ppm.
 Accuracy  + 0.05pH; + 0.50C; + 2% Full Scale (EC/TDS)
 Typical EMC Deviation  + 0.02 pH; + 10C; + 2% Full Scale (EC/TDS)
 Temperature 
 Compensation
 pH : Automatic
 Auto Shut-off  After 8 minutes
 Battery Life/Type  100 hours approx. continuous use/4 x 1.5V
 Dimensions  163 x 40 x 26 mm
 Weight  85 g.

 

Brouchure 


Model : HI98129


SOM CODE : 1462/256
Model : HI255
COMPANY : HANNA, ITALY.

COMBINED PH/MV/AND EC/TDS/NACL METER FOR LABORATORIES, RANGE PH -2.00 TO 16.00, EC 300 TO 2999 Us/CM, TDS 150 TO 1499 PPM, NaCI 0 TO 400%.

HI 255 is a high performance precision instrument that measures a multitude of parameters, each over a wide range. With this single laboratory bench meter you can measure pH, ORP, conductivity, TDS, NaCl percentage and temperature. Utilizing an external temperature probe, pH readings are automatically temperature compensated. pH calibrations are customizable - up to 3 reference points, chosen from the 5 available memorized buffers - to ensure a higher level of precision. EC measurements can be compensated relative to a selected reference temperature of 20 or 25°C. The EC calibration mode allows you to chose from among 6 memorized buffers and performed at single-point calibration. The most suitable EC and TDS range for your application is automatically selected. With a built-in logging function, measurements are stored in non volatile memory, and can be downloaded to a PC through the RS232 serial port. In addition to these features, HI 255 is contains GLP features that store the calibration and measurement data of any sample, to be displayed upon request.

SPECIFICATION:

 Range 

  pH/ORP -2.00 to 16.00 pH; -2.000 to 16.000 pH / ±699.9 mV; ±2000 mV

EC 0.00 to 29.99 µS/cm; 30.0 to 299.9 µS/cm; 300 to 2999 mS/cm
3.00 to 29.99 mS/cm; 30.0 to 200.0 mS/cm; up to 500.0 mS/cm actual EC*
TDS 0.00 to 14.99 ppm; 15.0 to 149.9 ppm; 150 to 1499 ppm;
1.50 to 14.99 g/L; 15.0 to 100.0 g/L; up to 400.0 g/L actual TDS*
NaCl 0.0 to 400.0% NaCl
 Resolution   pH/ORP 0.01 pH; 0.001 pH / 0.1 mV (±699.9 mV); 1 mV (±2000 mV)
EC 0.01 µS/cm; 0.1 µS/cm; 1 µS/cm; 0.01 mS/cm; 0.1 mS/cm
TDS 0.01 ppm; 0.1 ppm; 1 ppm; 0.01 g/L; 0.1 g/L
NaCl 0.1% NaCl
Power Supply 12 Vdc adapter (included)
 Accuracy  EC ±1% of reading ±(0.05 µS/cm or 1 digit)
TDS ±1% of reading ±(0.03 ppm or 1 digit)
NaCl ±1% of reading
 Temperature 
 Compensation
manual or automatic, -10.0 to 120.0°C (14 to 248°F) for pH;
0.0 to 60.0°C (32 to 140°F) for EC;
(can be diabled for measuring actual EC and TDS values)
 Dimensions  240 x 182 x 74 mm (9.4 x 7.2 x 2.9")
 Weight  1.1 kg (2.4 lb.)

 

Brouchure 

 

 

 

 

 

 


SOM CODE : 1462/128
Model : HI 98128
COMPANY : HANNA, MAURITIUS.

The Latest Invention In Ph Meter( pHep4 & pHep5).

The pHep4 and pHep5 include features such as : 
1) Dual-level LCD.
2) Battery level indicator.
3) Replaceable pH electrode cartridge.
4) Stability Indicator.
5) Automatic shut-off.
6) Automatic Calibration.
7) Waterproof casing plus 100% buoyancy.

 

Brouchure 


SOM CODE : 1462/34
M
odel : HI9812-0
COMPANY : HANNA, ITALY.


PH/EC/TDS METER(1990US-1990PPM)

HI 9812-0 and HI 9812-5 are easy to use portable instruments for field measurements of pH, conductivity and TDS in water conditioning applications. Reduce your necessary tool set for field water-quality analysis. HI 9812-0 measures pH from 0.0 to 14.0. This meter also checks conductivity and TDS from 0 to 1990 mg/L, ideal for the water conditioning field. Calibration has been simplified to one point for both pH and conductivity/TDS modes. Both HI 9812-0 and HI 9812-5 are equipped with Automatic Temperature Compensation to remove the effects of temperature on your conductivity and TDS measurements. In addition, the BEPS (Battery Error Prevention System) will alert the user when low batteries could affect the readings. HI 9812-0 uses HANNA® 4-in-1 replaceable HI 1285-0 probe, while HI 9812-5 uses HI 1285-5. No probe changes are required when switching your measured parameter between pH, conductivity and TDS. Specifically engineered for water-quality applications, the pH electrode features a fiber junction and gel electrolyte that provides faster response and reduced contamination. Finally, HI 9812-5 also measures temperature in °C.

Specification:

 SOM CODE  1462/34
 Model  HI1982-0
 Range  pH 0.0 to 14.0 pH
EC 0 to 1990 µS/cm
TDS 0 to 1990 ppm
 Resolution  pH 0.1 pH
EC 10 µS/cm
TDS 10 mg/L.
 Accuracy pH ±0.1 pH
EC ±2% F.S.
TDS ±2% F.S.
 Temperature 
 Compensation
Automatic, 0 to 50°C with ß = 2%/°C (EC/TDS only)
Calibration: manual at 1 point (all parameters except temperature)
 Battery Life/Type  1 x 9V / approx. 150 hours of continuous use
 Dimensions  165 x 75 x 45 mm (6.9 x 2.9 x1.8")
 Weight 180 g (6.3 oz.)

 

Brouchure 

 

 

 


SOM CODE : 1462/127
M
odel : HI98130
COMPANY : HANNA, ITALY.

pH /TDS/ EC/DC COMBO TESTER ELECTRODE.

This portable waterproof instrument offers high accuracy pH, EC/TDS and temperature readings in a single tester! No more switching between meters for your routine measurements.

Key features...

  • Replaceable pH electrode with renewable cloth junction

  • EC/TDS graphite electrode

  • Dual-level LCD displays pH or EC/TDS and Temperature simultaneously

  • Switchable between °C and °F

  • pH and EC/TDS readings are automatically temperature compensated

  • Battery level indicator

Automatic one or two point calibration (requires pH and EC/TDS calibration solutions sold separately). Meter is waterproof and it floats. Dual line LCD displays pH, Conductivity / Total Dissolved Solids, and Temperature. Unique renewable cloth pH electrode junction - when clogged, simply pull a short length out, snip off old section, and expose fresh material.

Specification:

 SOM CODE  1462/127
 Model  HI98130
 Range 
  • EC: 0.00 to 20.00 mS/cm. (20,000 µS/cm)
  • TDS: 0.00 to 10.00 ppt. (10000 ppm)
  • pH: 0.00 to 14.00.
  • Temp: 0.0 to 60.0 °C (32.0 to 140.0°F
  •  

     Resolution 
    • EC: 0.01 mS/cm.
    • TDS: 0.01 ppt.
    • pH: 0.01
    • Temp: 0.1 °C or 0.1°F.
     Accuracy
    • EC/TDS: ±2% F.S.
    • pH: ±0.05.
    • Temp: ± 0.5 °C or ±1 °F.
     Temperature 
     Compensation
    • pH: automatic
    • EC/TDS: with ß=0.0 to 2.4%/°C.
    Calibration:
    • pH: Automatic 1 or 2 point w/ 2 sets of memorized buffers.
    • EC/TDS: Automatic at 1 point.
     Battery Life/Type  4 x 1.5V w/ Battery error prevention system/100 hours.
     Dimensions  163 x 40 x 26mm (6.4 x 1.6 x 1.0 inches)
     Weight 85g (3.0oz)

    Brouchure 

    Model : HI98130

     

     

     

     


    SOM CODE : 1462/813
    M
    odel : HI9813-6
    COMPANY : HANNA, ITALY.

    pH EC TDS  Meter, GroChek HI9813-6, Waterproof pH/EC/TDS/Temperature Meter with pH Electrode Diagnostic

    pH electrodes are commonly designed to produce and output signal equal to 0 mV when immersed in a solution with pH 7. But a constant output value at pH 7 occurs as a result of certain adverse events, such as:

    • A broken bulb in the pH electrode • A short circuit in the cable or connector • Magnetic force leakage in the cable or connector (for example, in case of excessive humidity)

    In these situations, the instrument displays a false reading at pH 7 and the user may not be aware that corrective measures are necessary; particularly if the user is anticipating a pH neutral reading. To avoid this problem, HANNA instruments® developed F.S.T. technology for HI 9813-6.

    With this special security system, a system failure will force a fixed value close to pH 4, rather than pH 7, and render the problem clearer to the user.

    For added confidence in your measurements, the meter is equipped with two Lades and a "CHECK" button. While pressing this button, upon immersing the electrode in the Cal-Check solution HI 50021P, one of the LEDs will light up to indicate the status of the meter. The green LED ("OK") indicates the probe is working correctly, while the red LED ("C&C" Clean & Cal) indicates the electrode needs attention

    Specification:

     SOM CODE  1462/813
     Model  HI1983
     Range 
  • EC: 0.00 to 20.00 mS/cm. (20,000 µS/cm)
  • TDS: 0.00 to 10.00 ppt. (10000 ppm)
  • pH: 0.00 to 14.00.
  • Temp: 0.0 to 60.0 °C (32.0 to 140.0°F
  •  

     Resolution 
    • EC: 0.01 mS/cm.
    • TDS: 0.01 ppt.
    • pH: 0.01
    • Temp: 0.1 °C or 0.1°F.
     Accuracy
    • EC/TDS: ±2% F.S.
    • pH: ±0.05.
    • Temp: ± 0.5 °C or ±1 °F.
     Temperature 
     Compensation
    • pH: automatic
    • EC/TDS: with ß=0.0 to 2.4%/°C.
    Calibration:
    • pH: Automatic 1 or 2 point w/ 2 sets of memorized buffers.
    • EC/TDS: Automatic at 1 point.
     Battery Life/Type  4 x 1.5V w/ Battery error prevention system/100 hours.
     Dimensions  163 x 40 x 26mm (6.4 x 1.6 x 1.0 inches)
     Weight 85g (3.0oz)

    Brouchure 

    Model : HI9813-6

     

     

     


     

    SOM CODE : 1462/2
    Model : HI98107
    COMPANY : HANNA, ITALY.

    pH Tester Pocket 0.0 to 14.o pH Battery Power.
    The HI 98107 (pHep®), which is the result of over two decades of research and manufacturing experience, is the updated version of our widely popular 96107 (pHep®). Today the redesigned pHep series feature a rugged and ergonomically enhanced casing that fits comfortably in your hand and a larger LCD which makes it easier to read at any angle. With the latest innovation of a non-clogging fiber junction the new pHep meters last much longer. Simply pull out 1-2 mm (1/8") of the junction fiber to completely renew the junction.
    Specifications :

     SOM CODE 1462/2
     Model  HI 98107
     Range pH

     0.0 to 14.0

     Resolution pH  0.1
     Accuracy  + 0.1
     Typical EMC  + 0.1
     Calibration  Manual 1 or 2 points.
     Temperature 
     Compensation
     NA
     Dimensions  175 x 41 x 23 mm
     Weight  78 g.

     

    Brouchure 


    COMPANY : HANNA, ITALY.

    pH/TDS Meter W/ Probe 0/1990 µS/CM Watercheck.
    Watercheck is a combination pocket meter providing on-the-spot measurements of pH and conductivity of TDS.

    Features :
    - 2 meters in 1.
    - Long battery Life.
    - FRP : Fast Response Probe.


    Specifications :

     SOM CODE 1462/114 1462/115
     Model  HI 98114( Watercheck )  HI 98115 ( Watercheck1 )
     Range pH  0.00 to 14.00
     0 TO 1990 µS/cm
     0.00 to 14.00
     0 to 1990 ppm (mg/L)
     TDS Ratio  -----  0.5 ppm = 1 µS/cm
     Resolution pH  0.1pH
     10 µS/cm
     0.1pH
     10 ppm
     Accuracy  + 0.2 pH  + 0.2 pH
     Typical EMC  + 0.2 pH  + 0.2 pH
     Temperature
     Compensation
     Automatic with a ß of 2%
     per degree 0C
     Automatic with a ß of 2%
     per degree 0C
     Dimensions  194 x 29 x 15mm  194 x 29 x 15mm
     Conductivity/TDS 
     Calibration.
     Single Point.  Single Point.
     Weight  70 g.  70 g.

     

    Brouchure 


    COMPANY : HANNA, ITALY.

    pH Tester Standard Waterproof  0.0 to 14.0 pH.

    The new waterproof housings of the pHep®  waterproof testers provide
    complete protection in outdoor applications, harsh industrial environments as
    well as accidental spills. These testers are ideal for swimming pools, fish
    farming, electroplating industry, printing, agriculture, waste water processing and many other application where humidity and condensation would render litmus paper useless or ruin circuitry of ordinary meters.

    Features :
    -Completely waterproof.
    -Easy-to-read LCD
    -Positive push button 'ON/OFF' switch.
    -300 hour of battery life.
    -Automatic Temperature Compensation.
    -HI 98153 is microprocessor based with
     error and self-diagnostic message.


    Specifications :

     SOM CODE

    1462/14

    1462/17

     Model

    HI 98151

     HI 98153

     Range pH  0.0 to 14.0  0.00 to 14.00
     Resolution pH  0.1  0.1
     Accuracy  + 0.1 pH  + 0.1 pH
     Typical EMC  + 0.1 pH  + 0.1 pH
     Temperature
     Compensation
     NA  Automatic 0 to 500C
     Dimensions  150 x 30 x 24 mm  150 x 30 x 24 mm
     Conductivity/TDS 
     Calibration.
     Manual 1 or 2 points  Automatic 1 or 2 points
     Weight  85 g.  85 g.

     

    Brouchure 


    SOM CODE : 1462/15
    Model : HI98103.
    COMPANY : HANNA, ITALY.

    pH Tester LCD 0.00 - 14.00 pH/0.01pH with Electrode.

    At
    the cost of a few rolls of pH litmus paper, you can have the industry's latest electronic pH tester. checker ® supplies you with the fast and accurate readings on a large LCD. 

    Specifications :

     SOM CODE  1462/15
     Model  HI 98103
     Range pH  0.00 to 14.00
     Resolution pH  0.01
     Accuracy  + 0.2
     Typical EMC  + 0.1
     Calibration  Manual 2 points through  
     trimmers.
     Dimensions  66 x 50 x 25 mm
     Weight  70 g.

     

    Features :
    -
    Large and easy to read LCD.
    -High accuracy with 0.01 resolution.
    -Two point fast and accurate calibration.
    -Usable with virtually and pH electrode

    Brouchure 


    SOM CODE : 1462/12
    Model : PICCOLO+.
    COMPANY : HANNA, ITALY.

    pH Meter & Thermometer 1-13 pH/0-70 DC LCD ATC.

    PICCOLO is a revolutionary pH-meter with a 4-in-1 "Electrode + Amplifier" design. Conventional pH-meters are susceptible to the weak high impedance signal which makes the electrode, connector, cable and meter delicate and vulnerable to noise, humidity and dirty environment.

    PICCOLO
    has overcome this problems with a preamplifier electrode delivering a strong signal to the meter. The 4-in-1 interchangeable electrode is inexpensive and rugged and houses the pH sensor, reference system, temperature sensor and the amplifier module.

    Features :
    -Accuracy.
    -Easy to use.
    -Replaceable Electrode.
    -Automatic Temperature Compensation.
    -Temperature Read-out.


    Specifications :

     SOM CODE  1462/12
     Model  PICCOLO+
     Range  1.00 to 13.0 pH
     0.0 to 70.0 0C
     Resolution  0.01 pH
     0.1 0C
     Accuracy  +0.01pH/ +10C
     Typical EMC  +0.2 pH/+10C
     Dimensions  265 x 29 x 15 mm
     Weight  400 g.

     

    Brouchure 


    SOM CODE : 1462/251
    Model : HI121
    COMPANY : HANNA, ITALY.


     

    Datalogging pH Meters with Cal Check

    • Measure pH, mV, Temp and Selective Ion (HI 121 only)

    • Calibration Check Feature

    • GLP Compliant

    • Selectable accuracy 0.01 or 0.001pH

    When pH measurements need to be performed, the calibration phase is very important. It is often necessary for the user to measure extreme pH values or values far from standard calibration buffers. HI 120 and HI 121 can offer help in these situations, thanks to automatic calibration in up to 5 points. Users can select each point from among the 7 factory stored values and up to 2 more values manually entered for specific applications. Moreover, thanks to Calibration Checktm, good calibration results can be easily viewed directly on the display with the percentage information regarding pH electrode condition and response. Both pH meters are in compliance with GLP. HI 120 can also perform ORP measurements and the HI 121 adds ion-selective measurement capability as well. Both of these pH meters store data that can be easily downloaded to a PC thanks to an RS232 port and optional HI 92000 software.

    HI 120 is supplied complete with HI 1131P pH electrode, HI 7662-T temperature probe, pH 4 and pH 7 buffers, electrolyte solution, 12 Vdc power adapter and instructions. HI 121 is supplied complete with HI 1131P pH electrode, HI 7662-T temperature probe, pH 4 and pH 7 buffers, electrolyte solution, 12 Vdc power adapter and instructions.

    Specifications:

    Range pH :-2.00 to 16.00 pH / -2.000 to 16.000 pH

    Range Selective Ions (HI 121 only) :0.001 to 19999 ppm

    Accuracy (@20°C/68°F) pH :±0.01 pH / ±0.002 pH

    Dimensions :280 x 203 x 84 mm

    Weight :1.8 kg (4.0 lb.)

     

    Brouchure 


    SOM CODE : 1462/56
    Model : HI 255
    COMPANY : HANNA, Italy.

    Combination pH/mV and EC/TDS/NaCl Meter for Laboratories

    HI 255 is a high performance precision instrument that measures a multitude of parameters, each over a wide range. With this single laboratory bench meter you can measure pH, ORP, conductivity, TDS, NaCl percentage and temperature.

    Utilizing an external temperature probe, pH readings are automatically temperature compensated. pH calibrations are customizable - up to 3 reference points, chosen from the 5 available memorized buffers - to ensure a higher level of precision. EC measurements can be compensated relative to a selected reference temperature of 20 or 25°C. The EC calibration mode allows you to chose from among 6 memorized buffers and performed at single-point calibration. The most suitable EC and TDS range for your application is automatically selected.

    With a built-in logging function, measurements are stored in non volatile memory, and can be downloaded to a PC through the RS232 serial port. In addition to these features, HI 255 is contains GLP features that store the calibration and measurement data of any sample, to be displayed upon request.

     

     SOM CODE  1462/56
     Range pH/ORP -2.00 to 16.00 pH; -2.000 to 16.000 pH / ±699.9 mV; ±2000 mV
     Resolution pH/ORP  0.01 pH; 0.001 pH / 0.1 mV (±699.9 mV); 1 mV (±2000 mV)
     Accuracy  ±0.01 pH; ±0.002 pH / ±0.2 mV (±699.9 mV); ±1 mV (±2000 mV)
     Temperature
     Compensation
     0.0 to 60.0°C (32 to 140°F) for EC;
    (can be diabled for measuring actual EC and TDS values)
     Dimensions 240 x 182 x 74 mm (9.4 x 7.2 x 2.9")
     Weight

    1.1 kg (2.4 lb.)

     

    Brouchure 


    SOM CODE : 1462/57
    Model : HI 4211
    COMPANY : HANNA, ITALY.

    Hanna HI 4211 Single- and HI 4212 Dual-Channel Meters
     

    • Simultaneous dual real-time graphing and datalogging

    • Features exclusive Calibration Check™

    • Acoustic signal alarm

    • Opto-isolated USB and RS-232

    These pH meters have a backlit, dot matrix display; and perform electrode diagnostics. As part of the Calibration Check feature, users are alerted to potential problems, such as probe conditions and readings outside calibration range. Access on-screen related help feature; and guidelines and procedures in English, Italian, Spanish, and French.

    Dual-channel model 4432B provides simultaneous graphing and logging of each independent channel on the screen. Dual-channel model also provides direct ion concentration readout or the use of increment methods.

    Both units include pH electrode, temperature probe, power adapter, pH 4 and 7 buffer solutions, electrode refilling solution, electrode holder, and instructions.

    SPECIFICATIONS

     SOM CODE  1462/57
    Ranges pH: -2.000 to 20.000

    mV: ±2000

    Resolution pH: 0.1, 0.01, 0.001  

    mV: 0.1 0.1  

    Accuracy pH @20°C: ±0.1,±0.01,±0.002 ±1 LSD

    mV @20°C: ±0.2 ±1 LSD

    Temp Compensation: Automatic or manual from -20.0 to 120.0°
    Datalogging: 5000 samples
    Dimensions: 6 3/8W x 3 3/4H x 9 1/8D

     

    Brouchure 


    SOM CODE : 1462/255
    Model : HI931001
    COMPANY : HANNA, Romania.

    HI 931001 pH and ORP Electrode Simulator with Display

    HI 8427 is designed specifically to simulate pH and ORP electrodes and to confirm proper functioning of your meter. Standard pH electrode ranges are selectable with a dial on the front panel. The pH range is pH 0, pH 2, pH 4, pH 7, pH 10, pH 12 and pH 14 with the mV range being -1900 mV, -350 mV, +350 mV and +1900 mV.

    Manual temperature compensation from 0 to 50°C (32 to 122°F) allows temperature simulation. Provided with a universal BNC connector, this unit is also a high impedance tester, for cable and connector inspection with a leakage sensitivity of 109 ohm. This unique tester is a "one of a kind" in the industry that eliminates the need for very expensive mega ohm meters.

    Sometimes it is difficult to work out whether a particular malfunction is due to the meter or the electrode. If you have been in this position, the HANNA® precision HI 931001 pH/ORP electrode simulator is the perfect solution for you. By simply connecting HI 931001 to your meter's input socket and turning the dials, pH readings can be simulated from 0 to 14 pH in 0.01 steps. The output signals all correspond to pH values at 25°C and your pH meter should display the same values that can be seen on the simulators LCD.

    For the mV range, HI 931001 can simulate output from -1000 to +1000 mV in 1 mV steps.

     SOM CODE  1462/255
    Ranges pH       0.00 to 14.00
    mV       -1000 to 1000
    Resolution
    pH       0.0
    mV       1
    Accuracy
    pH       ±0.01
    mV       ±1
    Temp Compensation:
    All output values are simulated at 25°C
    Dimensions:
    7.1 x 3.3 x 1.6" (180 x 83 x 40mm)
    Weight
    11.3 oz. (320 g)

     

    Brouchure 

     

     

     

     


    SOM CODE : 1462/55
    Model : HI 8424
    COMPANY : HANNA, ROMANIA.

    HI-8424 Automatic calibration pH meter

    The HI-8424 offers similar performance as a bench pH meter, yet is portable and better value for money. It is supplied complete with a laboratory grade double junction pH electrode and a stainless steel temperature sensor.
     The HI-8424 automatically compensates all pH measurements with regards to the temperature of the solution being measured across the range 0 to +70C. In addition it is programmed with 3 different buffer value standards which it will automatically recognise during the 2-point pH calibration.
     In addition to pH, a mV range is included allowing ORP (Redox) readings to be taken in using an optional ORP/Redox electrode. The mV range is divided into two, with the lower range providing 0.1mV resolution and improved accuracy allowing Ion Selective Electrodes to be used with the meter.

     

     

     

    Brouchure 

    Model : HI 8424


    SOM CODE : 1462/812
    Model : HI9812-5
    COMPANY : HANNA, Italy.

    PH TESTER POCKET,RANGE PH 0.0 TO 14.0 BATTERY POWER

    • Simple and inexpensive
    • Non-clogging fiber junction
    • Large LCD

     

    Brouchure 


    SOM CODE : 1462/872
    Model : HI 8720E020+
    COMPANY : HANNA, Italy.

    ORP CONTROLLER WITH SELF DIAGNOSTIC TEST WITH PH  ELECTRODE

    This instrument allows the selection of a setpoint for oxidizing or reducing dosage. It is provided with self-diagnostic feature to control the calibration at 0 and 500 mV. The user can also set the tolerance of the setpoint (10 to 200 mV), before an alarm is activated. When used in conjunction with the HI 8710 pH controller, the ODCD* function (featured by the HI 8710) will ensure that the ORP dosage will start only when the pH level is correct. These instruments have been designed for easy and fast installation, and are provided with membrane keypads on the front panel, large display and auto diagnostic functions.

     

     

    Brouchure 


    SOM CODE : 1462/317
    Model : HI99163
    COMPANY : HANA ITALY.

    HANNA HI 99163 Meat PH Meter, HI99163

    HI 99163 is a specific instrument for the pH analysis of meat products. The specially designed electrode FC 232D incorporates many essential features to perform reliably without damaging the sample. This probe has a built-in temperature sensor that provides automatic temperature compensation, an open junction to avoid a clogged reference and its external body material is non-toxic and food compatible.
     The probe body has an external thread to securely screw on the stainless steel penetration blade FC 099, included with the kit. The replaceable penetration blade allows the user to measure not only the surface, but also the internal pH of the meat. This pH meter is simple to use with only 2 buttons. All necessary information is clearly displayed on the LCD.
     Besides displaying pH and temperature, the LCD of the HI 99163 also indicates the reading stability and remaining battery charge.
     Calibration is automatic at 1 or 2 points, selectable between 2 memorized buffer sets. Battery life is more than 1500 hours and the instrument automatically turns off after 8 minutes of inactivity.

     

    Brouchure 

     


    SOM CODE : 1462/93
    Model : HI931700+HI1002/3
    COMPANY : HANNA, ITALY.


    pH Controller 220V/240V With pH Electrode & Mounting Bracket.
    -
    HI931700
    is the smallest panel mounted pH controller around.
    - Its small size allows installation close to the monitored equipment, thus adding to its 
      versatility in the industry.
    - Possible application are almost infinite; from textile (particularly in the monitoring of pH 
      in the wool processing), paper, photographic, planting and aquarium to the process 
      industry. Also small swimming pools and water purification plants can be 
      controlled with HI931700.
    - HI931700 is equipped with single set point with selection of acid or alkaline dosage. It   
      accept direct input from any combination pH electrode ending in a BNC connector and 
      provides measurements from 0 to 14 pH with a resolution of 0.01 pH.

    Combination pH Electrodes for high pressure application - HI1002/3

     Model  Junction  Max.Pressure  Cable  Temp
     Range 0C
     HI1002/3  double  6 bar  3 m  -5 to 800C

     


    Brouchure 

    Model : HI931700


    Model : HI1002/3


    SOM CODE : 1462/124
    Model : HI1131B

    COMPANY : HANNA, ITALY.

    pH Electrode Combination BNC General Purpose.

    Combination pH Electrode :

     Junction

     Shape

     Plug

     Pressure
     Bar/PSI

    Cable

     Temp.
     Range0C

    Body

     A

     SE

     B

     0.5/7.25

     Coaxial

     -5/+100

     glass



    SOM CODE : 1462/53
    Model : HI1053B
    COMPANY : HANNA, ITALY.

    pH Electrode Combination BNC Emulsion.

    Combination pH Electrode :

     Junction

     Shape

     Plug

     Pressure
     Bar/PSI

     Cable

     Temp.
     Range0C

     Body

     B

     CB

     B

     0.5/7.25

     Coaxial

     -5/+100

     glass

     


    SOM CODE : 1462/123
    Model : HI1230B
    COMPANY : HANNA, ITALY.


    pH Combination Electrode BNC Plug 1Mtr Dia 3mm.
    pH combination electrode with BNC plug and a cable of 1 meter.







    SOM CODE : 1462/332
    Model : HI1332B
    COMPANY : HANNA, ITALY.


    pH Meter Sensor.


    Combination pH Electrodes

     Model

     Junction

     Shape

     Plug

     Pressure
     Bar/PSI

     Cable

     Temp
     Range 0C

     HI1332B

     A

     SC

     B

     0.5/7.25

     Coaxial

     0/+80



    Model : HI1332B


    SOM CODE : 1462/871
    Model : HI871E020
    COMPANY : HANNA, Italy.

    pH Controllers DUAL OUTPUT pH 0-20 MA

     


    SOM CODE : 1462/124
    Model : HI 1131B
    COMPANY : HANNA, Italy.

    pH elektroder

    HI-1131B glass body pH electrode is supplied complete with a 1m cable and a BNC connector. Measuring 120mm long by 12mm diameter and terminated with a spherical 9.5mm diameter measuring bulb.

     


    SOM CODE : 1462/121
    Model : HI 1131P
    COMPANY : HANNA, Italy.

     Instruments HI 1131P Laboratory Combination pH and ORP Electrodes

     


    SOM CODE : 1462/120
    Model : HI 1139B
    COMPANY : HANNA, Italy.

     PH Electrode for PH 211

     


    SOM CODE : 1462/151
    Model : HI 7071
    COMPANY : HANNA, Italy.

    Electrolyte Solution, 3.5M KCl + AgCl
    4 x 30 mL bottles

    The electrolyte level in refillable electrodes should be checked before performing any measurements. If the level is low, refill with the proper electrolyte solution to ensure the correct electrode performance. This simple maintenance helps guarantee the efficiency and precision of your refillable electrodes. Electrolyte solutions are also available in FDA compliant bottles.

     


    SOM CODE : 1462/409
    Model : HI 7082
    COMPANY : HANNA, Italy.

    Electrolyte Solution, 3.5M KCl
    4 x 30 mL bottle

    The electrolyte level in refillable electrodes should be checked before performing any measurements. If the level is low, refill with the proper electrolyte solution to ensure the correct electrode performance. This simple maintenance helps guarantee the efficiency and precision of your refillable electrodes. Electrolyte solutions are also available in FDA compliant bottles.

     

     

     

     


    SOM CODE : 1462/123
    Model : HI 1123OB
    COMPANY : HANNA, Italy.

     

    HANNA INSTRUMENTS - HI-1230B - ELECTRODE, PH

     


    SOM CODE : 1462/226
    Model : HI 1288
    COMPANY : HANNA, Italy.

     

    Replacement pH/EC/TDS/T Probe HI1288 (HI 1288)

     

     

     

     


    SOM CODE : 1462/332
    Model : HI 11332B
    COMPANY : HANNA, Italy.

     

    Hanna Instruments HI 1332B Rugged pH and ORP Electrode for General Use

     

     


    SOM CODE : D315/2
    Model : HI 70004P
    COMPANY : HANNA, Italy.

    pH 4.01 Calibration Solution, 25 x 20mL, case of 25  

    Hanna's Buffer solutions are made from established formulas and are standardized with a pH meter that is calibrated to NBS/NIST primary standard buffer solutions. The 20 mL sachets are ideal for infrequent calibrations while for heavy-duty applications, you can choose from the popular 230 mL, 1 liter or 1 gallon containers. Now the pH 4 buffers carry lot #, expiry date as well as pH/C chart on every bottle. HI 7004L/C and HI 8004L/C are also supplied with an analysis certificate.

    Weight                    : 1.5 lbs.
    Package Dimensions: 6.9L x 6.3W x 3.3H

     


    SOM CODE : D315/3
    Model : HI 70007P
    COMPANY : HANNA, Italy.

     pH 7.01 Calibration Solution, 25 x 20mL, case of 25   

    pH 7 is the most frequently used pH buffer. All Hanna solution bottles come with a pH Vs. Temperature chart together with the production lot # and expiration date to guarantee maximum accuracy. Formulation Hanna pH buffers are made of Potassium Dihydrogen Phosphate and Disodium Hydrogen Phosphate and are standardized with a pH meter that is calibrated to NIST primary standard buffer solutions (NIST 186Ie & 186IIe and NIST 158g S.R.M.).

    Weight                    : 1.3 lbs.
    Package Dimensions: 6.9L x 6.2W x 3.4H

     


    SOM CODE : 1462/704
    Model : HI 731313
    COMPANY : HANNA, Italy.

     

    Maintenance kit for HI 93703

    Rugged carrying case, 340x230x90 mm (13.4x9.1x3.5"), for HI 93703 turbidity meter, complete with calibration and cleaning solutions, tissues and cuvets.

     


    SOM CODE : D71
    Model : 924005/3030
    COMPANY : JENWAY,ENGLAND.

    PH ELECTRODE GLASS COMBINATION.

     


    SOM CODE : 1462/126
    Model : HI 5412
    COMPANY : HANNA, Italy.

     PH CALOMEL ELECTRODE

     


    SOM CODE : 1462/54
    Model : HI 3131B
    COMPANY : HANNA, Italy.

    ORP PT GLASS ELECTRODE

     



    SOM CODE : N84/14
    Model : HI70300L
    COMPANY : HANNA, Italy.

    Storage Solution For pH/ORP Electrode 460 ml/Bottle.

    This solution are prepared with high grade Potassium Chloride and Potassium 
    Hydrogen Phthalate by titration with NIST 2201 standardized Silver Nitrate and 
    NIST 84j standardized Sodium Hydroxide Solution, respectively.


    SOM CODE : 1462/6.
    Model : 3080/3080HL, 3090/3090HL
    COMPANY : JENWAY, ENGLAND.

    pH METER
    The industrial range of electrochemical instrument are supplied in either DIN standard sized steel panel mounting cases. Or wall mounted water resistant cases.

    All of these units will measure pH over the range of 0 to 14pH with a switchable resolution of 0.1pH to 0.01pH.

    The pH mode is automatically temperature compensated over the range of 0 to 1000C. A millivolt mode is also provided for the measurement of Redox potentials.

    Specifications :

     Som Code  1462/6
     Model  3080/3090
     Ranges  0 to 14.0 pH
     0 to 14.00 pH
     0 to + 1999 mV
     Resolution  0.1pH
     0.01pH
     1 mV
     Accuracy  + 0.1 pH
     + 0.2 pH
     + 1mV
     Display  12.5 mm LED
     Power  110/240V AC,  50/60Hz.
     Size/Weight  3080   96x96x150mm /1.1 kg
     3090  225x220x125mm / 2 kg

     


    SOM CODE : D1254/27
    Model : 10010-450
    COMPANY : VWR,U.S.A.

    3-Star pH Meters

    Ideally suited for general lab use, environmental field applications, and teaching. These compact pH meters offer an easy, three-button operation. A simple set-up menu and icon prompts guide non-technical users through the measurement process. SMART STABILITY* and SMART AVERAGING* functions automatically optimize accuracy, precision, and response time. Up to 10 setup parameters and calibrations may be stored and password-protected individually, enabling multiple users to share one unit. Additional methods, as well as software updates, are available for download. Meters feature a bright LCD display with ready indicator; automatic or manual pH calibration, with 1 to 5 calibration points; automatic buffer recognition of NIST, US, and DIN buffers; temperature calibration of ATC; ability to print or view the last 10 calibrations; average slope and slope of segment included in printout of measurements; advanced self-tests on meter operation with self-diagnostics; and 1000-point data logging. Data can be downloaded to printer or computer via the RS-232 connection. Meters are available with a wide variety of electrodes and probes to meet specific applications.

    Benchtop meters meet IP54 specifications for protection from water and feature BNC pH electrode connectors and autosampler operation ability. The waterproof handheld meters meet IP67 specifications. Handheld meters also feature waterproof BNC pH electrode connectors and an extended-life battery for up to 2000 hours of uninterrupted operation. The optional Star Navigator 21* software ensures regulatory compliance and includes system validation, security and audit trails with time and date stamps, archiving, and record retention and recovery.

     Specification:

    PH Range –2.000 to 19.999
    Resolution 0.1/0.01/0.001
    Relative accuracy ±0.002
    Mv Range ±1999.9
    Resolution 0.1
    Relative accuracy ±0.2 or 0.05%, whichever is greater
    Temp Range –5 to 105°C (23 to 221°F)
    Resolution 0.1 up to 99.9°C
    Relative accuracy ±0.1°C

     


    SOM CODE : D550/18
    Model : 11388-340
    COMPANY : VWR,U.S.A.

    • Simple 3-Button Operation

    • Bright LCD Display with Ready Indicator

    • Automatic or Manual pH Calibration

    • VWR Three-Year Limited Warranty

    Ideally suited for general lab use, environmental field applications, and teaching. These compact pH meters offer easy, three-button operation and a clear, intuitive user interface. A simple set-up menu and icon prompts guide non-technical users through the measurement process. Up to 10 setup parameters and calibrations may be stored and password-protected, making them ideal for multiple users. Additional methods, as well as software updates, are available for download. Meters feature waterproof BNC pH electrode connectors; automatic or manual pH calibration with 1 to 5 calibration points; automatic buffer recognition of NIST, US, and DIN buffers; advanced self-tests on meter operation with self-diagnostics; and 200-point data logging. Benchtop meters also feature a universal power adapter for worldwide operation. Data can be downloaded to printer or computer via the RS-232 connection.

    Benchtop meters meet IP54 specifications for protection from water and are compatible with an optional USB interface cable. These meters are CE marked, CSA and TÜV certified, and UL listed. The waterproof handheld meters meet IP67 specifications. Handheld meters also feature an extended-life battery for up to 2000 hours of uninterrupted operation and are CE marked.

    Optional 21 CFR part 11-compliant data collection software ensures regulatory compliance and includes system validation, security and audit trails with time and date stamps, archiving, and record retention and recovery.

     Specification:

    PH Range –2.000 to 19.999
    Resolution 0.1/0.01/0.001
    Relative accuracy ±0.002
    Mv Range ±1999.9
    Resolution 0.1
    Relative accuracy ±0.2 or 0.05%, whichever is greater
    Temp Range –5 to 105°C (23 to 221°F)
    Resolution 0.1 up to 99.9°C
    Relative accuracy ±0.1°C

     


    SOM CODE : 1522/7
    Model : 924005
    COMPANY :
    BIBBY SCIE,CYPRUS.

    GENERAL PURPOSE GLASS BODY PHELECTRODE

     

    Brouchure 


    SOM CODE : D71
    Model : 924005/3030
    COMPANY : JENWAY,ENGLAND.

    PH ELECTRODE GLASS COMBINATION.

     


    SOM CODE : 1462/126
    Model : HI 5412
    COMPANY : HANNA, Italy.

     PH CALOMEL ELECTRODE

     


    SOM CODE : 1462/54
    Model : HI 3131B
    COMPANY : HANNA, Italy.

    ORP PT GLASS ELECTRODE

     



    SOM CODE : N84/14
    Model : HI70300L
    COMPANY : HANNA, Italy.

    Storage Solution For pH/ORP Electrode 460 ml/Bottle.

    This solution are prepared with high grade Potassium Chloride and Potassium 
    Hydrogen Phthalate by titration with NIST 2201 standardized Silver Nitrate and 
    NIST 84j standardized Sodium Hydroxide Solution, respectively.


    SOM CODE : D150/558
    Model : KH-58600-00
    COMPANY : COLEPARMER,U.S.A


    Compact Portable PH/MV/TEMP Meter Kit

     


    SOM CODE : 1462/404
    Model : HI76404
    COMPANY : HANNA, ITALY.


    ELECTRODE HOLDER.

    Cantilever stand with a large steel base provides greater stability and flexibility and holds up to 3 electrodes in any position. The base is enamel coated for lasting protection against spills. It is also constructed in heavy steel, making the holder very sturdy and virtually impossible to tip over accidentally.


    SOM CODE : 1462/309
    Model : HI76405+
    COMPANY : HANNA, ITALY.

    Electrode holder with steel base

    Cantilever stand with large steel base provides greater stability and flexibility and holds up to 3 electrodes in any position.



    SOM CODE : 1462/122

    Model : HI7669/2N
    COMPANY : HANNA, ITALY.


    TEMPERATURE PROBE FOR pH METER.



    SOM CODE : 1462/767

    Model : HI766E1
    COMPANY : HANNA, ITALY.


    PROBE FOR GENERAL PURPOSE.


    SOM CODE : 1462/86
    Model : HI7686
    COMPANY : HANNA, ITALY.


    CONDUCTIVITY PROBE.



    Buffer Solution
    Made In : SPAIN.

     SOM CODE  MODEL  DESCRIPTION
     N84/23  SO10071000  Buffer solution pH=7 /1 Ltr per bottle
     N84/25  SO10091000  Buffer solution pH=9 /1 Ltr per bottle
     N84/27  SO10101000  Buffer solution pH=10/1 Ltr per bottle
     N84/28  SO20040500  Buffer solution pH=4 Red colored 500mL  per bottle

     


    Note : Please mention the product "SOM CODE" while making request   for quotation and  send it to dabab@somatco.com.       


    Copyright © Saudi (Overseas) Marketing And Trading Company -2011
    Developed by
    IT Dept.( SOMATCO )