SOM CODE : 1534/15.
Model : PFP7/C
COMPANY : JENWAY, ENGLAND.

Flame Photometer Digital Fitted W/STD Acc 220V.

Features :
Industrial & Clinical Analysis.
-Low temperature, single channel.
-Na & K filter as standard.
-Ca, Ba & Li filters optional.
-Electronic flame failure detection.
-Fine & coarse sensitivity controls
-Operates on propane, butane, natural gas or L.P.G. supplies.

Technical Specifications:

Model	PFP7/C (Clinical)
Ranges	120 - 160mmol/Na (Linearity) 0 - 10.0 mmol/L K
Limits of detection	Li < 0.25ppm Ca < 15ppm Ba < 30ppm
Reproducibility	< 1%
Electrical	220 V @ 50/60 Hz
Size	420x360x300mm
Weight	8 Kg.

It is fitted with automatic flame failure detector for user safety, making them ideal for use in clinical, industrial and education applications.

SOM CODE : 1534/12 & D66/18
Model : BWB-1
COMPANY : BWB TECHNOLOGY.U.K

Flame Photometer

Performance plus 5 Channel
Complete with Na,k,Li,Ca,Ba filters
Simultaneous Detection and display of all 5 elements
Dual mode for Na & K2 or Multi point Calibration ,Flame out detection
Automatic shutdown Diagnostic indicator.

Brouchure

SOM CODE : 1462/967
Model : HI96734
COMPANY : HANNA, ITALY.

Chlorine, Free and Total, High Range Photometer with 525 nm filter and Cal Check

Responding to the user's requirements for analyzing high concentrations of chlorine, HANNA® offers HI 96734, which permits free and total chlorine analysis up to 10.00 mg/mL. This auto-diagnostic portable photometer is dedicated to monitoring over-chlorination through to chlorinamine destruction. The advanced optical system employs a specialized tungsten lamp and a narrow band interference filter, assuring accurate readings. This instrument is equipped with Cal Check® validation function and standards to validate good performance at any time. Taking just a few short steps, the validation procedure is user-friendly and ensures that the meter is properly calibrated wherever you go. Hanna photometers use the exclusive ready-made, NiST traceable standards to verify the performance of the instrument and recalibrate if necessary. Cuvets are constructed from specialized optical glass to ensure the best and most consistent results. The positive locking system ensures that the cuvet is in the same position every time it is placed into the measuring cell. Our sample cell is designed to fit a cuvet with a wide neck to make it easier to add both sample and reagents. All instruments are factory calibrated and the electronic and optical design minimizes the need for frequent calibration. Ideal for field applications, these meters are splash proof and the lamp and filter units are protected from dust or dirt by a transparent barrier. Display messages aid the user during routine operation. The auto-off feature will disengage the meter after 10 minutes of non-use in measuring mode or 1 hour while in calibration mode. HI 96734 utilizes an adaptation of the USEPA Method 330.5 and Standard Method 4500-Cl. The reaction between free and total chlorine and DPD reagent causes a pink tint in the sample

Brouchure

Range	Free Chlorine	0.00 to 10.00 mg/L (ppm
	Total Chlorine	0.00 to 10.00 mg/L (ppm)
Resolution		0.01 mg/L (0.10 mg/L above 3.50 mg/L) (ppm)
Precision		±0.06 mg/L to 3.00 mg/L (ppm)
Light Source		Tungsten lamp
Light Detector		Silicon photocell with narrow band interference filter @ 525 nm
Method		Adaptation of the USEPA method 330.5 and Standard Method 4500-Cl G.

SOM CODE : 1462/982
Model : HI9828
COMPANY : HANNA, ITALY.

MULTIPARAMETER METER WATER QUALITY METER pH-0-14.pH/mV pH/mV,ORP,% SATURATION DO, mg/L DO,EC,ABS.EC,RESISTIVITY,TDS,SALANITY,SEAWATER,SP.GRAVITY, ATMOS.PRESSURE,TEMP.

The HI 9828 Multiparameter Portable Meter is a comprehensive analytical instrument, capable of measuring up to 13 critical water quality parameters (6 measured and 7 calculated), including pH, EC/TDS, ORP, DO, atmospheric pressure, and temperature. Some of the most advanced capabilities available are incorporated into this portable meter. Designed for intuitive operation, the menu-driven navigation is user-friendly and logical. A backlit 128 x 64 pixels graphic LCD, that automatically sizes the digits, allows full configuration of each measured parameter, displays on-screen graphing and has options for units and language selections, provides high-quality resolution and sophistication that is unsurpassed in its class.

Engineered with smart features such as auto recognition of pH/ORP probe, auto-ranging adjustments for EC/TDS readings, and measurement check - to eliminate erroneous readings - and more, our design actually simplifies operations and handling. There is virtually no learning curve to getting into this meter and quickly mastering it's capabilities. Each parameter is fully supported by the on-screen contextual HELP function, which is active during measurement and calibration modes. For field applications, Hanna's Quick Calibration allows the user to standardize pH, conductivity and dissolved oxygen, all with one solution! While in calibration mode, the meter will also assess and verify probe functionality. For monitoring and recording data, HI 9828 can be equipped with the optional T.I.S. - Tag Identification System: iButton©s with unique ID numbers. Installed at any sampling site, these tags will record and match specific location information with logging data. Comprehensive GLP features, such as last calibration date and status information, calibration time-out, and date and time tags associated with sample measurements, ensure consistency and accountability. The LOGGER function memorizes data from each connected sensors and log-on-demand & automatic logging can record up to 60,000 data samples. All data is downloadable to a PC via USB connectivity.

Brouchure

SOM CODE : 1462/733
Model : HI96734
COMPANY : HANNA, U.S.A.

PHOTOMETER WITH CALCHECK FREE CHLORINE AND TOTAL HIGH RANGE 0.000 TO 10.00

SOM CODE : D66/19
Model : 025004
COMPANY : Jenway, England.

CALIBRATION STD. SOLUTION FOR FLAME PHOTOMETER PFP7 . FLAME STD 100mmol/l NA 100mmol/l K 500ml

SOM CODE :1534/26
Model : 025005
COMPANY : Jenway, England.

CALIBRATION STANDARD 160MMOL/L SODIUM(Na) 8MMOL/L POTASSIUM(K) 500ML/BTL

SOM CODE :1534/6
Model : 025007
COMPANY : Jenway, England.

CALIBRATION STANDARD 120MMMOL/L SODIUM(Na) 2MMOL/L POTASSIUM(K)500ML/BTL

SOM CODE :1534/133
Model : 025008
COMPANY : Jenway, England.

CALIBRATION STANDARD 1.00M MOL/L LITHIUM 500ML/BTL

SOM CODE :1534/9
Model : 025009
COMPANY : Jenway, England.

CALIBRATION STANDARD 1000PPM CALCIUM(CA) 500ML/BTL.

SOM CODE : 1534/125
Model : 500125.
COMPANY : JENWAY, ENGLAND.

Calcium(Ca) Filter For Flame Photometer
This are the filters which are fitted in Flame Photometer and this is fitted at the time of ordering.

SOM CODE : 1534/126
Model : 500126/PFP105.
COMPANY : JENWAY, ENGLAND.

Lithium(Li) Filter For Flame Photometer
This are the filters which are fitted in Flame Photometer and this is fitted at the time of ordering.

SOM CODE : 1534/127
Model : 500127/PFP101.
COMPANY : JENWAY, ENGLAND.

Barium(Li) Filter For Flame Photometer
This are the filters which are fitted in Flame Photometer and this is fitted at the time of ordering.

SOM CODE : 1534/17
Model : PFP2.
COMPANY : JENWAY, ENGLAND.

Air compressor For Flame Photometer

SOM CODE : 1534/18
Model : 500018
COMPANY : JENWAY, ENGLAND.

Drain Trap For Flame Photometer

SOM CODE : 1534/46
Model : 500046
COMPANY : JENWAY, ENGLAND.

Mixing Chamber Complete Drain Trap For Flame Photometer

SOM CODE : 1534/59
Model : 5000059
COMPANY : JENWAY, ENGLAND.

Burner For Flame Photometer.

SOM CODE : 1534/193
Model : 500193
COMPANY : JENWAY, ENGLAND.

NEBULIZER INLET TUBE FOR FLAME PHOTOMETER.

SOM CODE : 1534/194
Model : 5000194
COMPANY : JENWAY, ENGLAND.

NEBULIZER CLEANING WIRE FOR FLAME PHOTOMETER

SOM CODE : 1462/74
Model : HI 93728-03
COMPANY : HANNA, ITALY.

Reagents for nickel, cadmium reduction method

Range: 0.0 to 30.0 mg/L

SOM CODE : D179/34
Model : HI 93713-01
COMPANY : HANNA, ITALY.

Reagent, 100 Tests - Low Range Phosphate

Note : Please mention the product "SOM CODE" while making request for quotation and send it to dabab@somatco.com.