COMPANY : DENVER INSTRUME,U.S.A
|D85/16||94001-05||CONTROLLER TITRATION PH 230V|
|D85/17||94001-25||MODULE TITRATION 230V|
→ Combine a controller with a titration module to form a complete titration system
→ Modular system lets you perform up to four independent titrations simultaneously with just one controller
→ Advanced controller measures conductivity, ion, pH, mV, and temperature
These titration systems perform coulometric Karl Fischer titrations on samples containing mere micrograms of moisture content. Determine water content in petrochemicals, pesticides, detergents, foods, pharmaceuticals, chemicals, solvents, and more. Microprocessor-controlled system guides you through every step with easy-to-understand prompts. Use the sealed keypad to enter parameters including sample identification, sample introduction time, endpoint persistence interval or endpoint slope control, solvent blank, and stirrer speed.
Titration system compensates for drift during titration and continuously monitors the Karl Fischer electrode. If Karl Fischer reagent is exhausted, controller displays a warning. Upon completion of titration, the controller calculates the result and displays total weight of water in the sample in µg, mg, ppm, or the percentage of moisture in the sample.
Before and between titrations, the built-in software automatically zeros the titration cell, and prompts you to enter the sample weight values manually or to transmit the weight values via output from a balance. For compatible balances, choose from our selection of balances from our ''Balance'' section or begin with the one listed under ''Accessories'' at right.
PART NUM : 285212437
COMPANY : SI ANALYTIC,GERMANY.
|D32/55||TITRONIC UNIVERSAL||TITRATOR TITRONIC- UNIVERSAL MODULE 2 WITH 20 ML DOSING UNIT, AS MODULE 1, WITH THE ADDITION OF MAGNETIC STIRRER TM96 230V|
The TITRONIC® universal unit not only allows you to perform dosing operations quickly and easily but also accomplishes manual titrating operations without difficulty.The burette can be used with all dosing liquids, solvents and titrants.
Dosing and titrating
The adjustment of any dosing volume and the dosing speed is made simply by pressing a button. For incremental dosing operations, the entry of the volume and the waiting time between the volume increments can be adjusted just as easily and quickly.
Manual titrating operations are performed using the hand control element TZ 3680, whereby 0.01 increments and 7 different titrating speeds are available. In addition, you can also call up a pre-titrating volume prior to each titration in order to reduce the titrating time.
Note : Please mention the product "SOM CODE" while making request for quotation and send it to *****@somatco.com